





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Eaton
1500VA 230V line-interactive UPS, tower/rack 2U, rail kit included
8 x IEC C13 outputs (10 A), up to 4 external batteries optional
The Eaton 5PX 1500i RT2U G2 is a 1500VA line-interactive uninterruptible power supply for 230V installations. It works both as a tower unit on a desk or floor and as a 2U rack-mounted unit, with a rail kit included. It is built for protecting IT and network equipment against power cuts, brownouts and voltage fluctuations.
The UPS corrects minor voltage problems without switching to battery, and it switches over to battery power when the mains supply drops out or goes outside acceptable limits. Connected equipment keeps running through the switchover. Runtime depends on the load and on whether external battery modules are fitted. Adding external batteries extends the time available for a controlled shutdown or for keeping systems online through longer outages.
The USB and RS232 ports let the UPS communicate with a server or workstation so that monitoring software can report status and start an orderly shutdown when the battery is low. The remote ON/OFF and remote power off terminals allow the UPS to be controlled from an external switch or building system. The network card slot can be fitted with an NMC Minislot or ModBus/JBus card, for integration with network or building management systems. Check with the supplier which card suits your system.
Because the unit has eight outputs, several devices can be protected from one UPS. Keep the total load within the rated 1500VA and check that each connected device uses a compatible IEC C13 lead.
Mount the unit in a standard 19-inch rack using the included rail kit, or place it upright as a tower. Keep ventilation openings clear. Connect the input to a suitable 230V supply and plug critical equipment into the protected outputs. Fit external batteries only with the approved Eaton 5PXEBM48RT2UG2 modules, up to four units.
Eaton
1500VA 230V line-interactive UPS, tower/rack 2U, rail kit included
8 x IEC C13 outputs (10 A), up to 4 external batteries optional
Share this on your favourite channel: