





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Eaton
9E 20000i, 20kVA / 16000W online UPS
Hardwired outputs, uses 9EEBM480 external batteries (max. 4)
The Eaton 9E 20000i is a 20kVA online UPS with a rated output of 16000W. It provides continuous, conditioned power to critical loads, so that servers, network systems and other essential equipment stay online during mains failures, brownouts, surges and other power problems.
As an online double-conversion design, the UPS feeds the load continuously from its inverter, which isolates connected equipment from disturbances on the incoming supply. This makes it suitable for environments where even a short interruption would disrupt operations or damage data.
Backup time depends on the load and the number of battery modules fitted. The 9E 20000i is designed to work with 9EEBM480 external battery modules, with a maximum of four per unit. Start with the batteries your site needs and add more later if your requirements grow. Confirm the battery configuration with your supplier before installation.
The built-in USB and RS232 ports allow the UPS to report its status and support automatic shutdown of connected computers during an outage. Only one of these two ports can be used at a time. The available card slot accepts a Network-MS, ModBus-MS or Relay-MS card, so the UPS can be monitored over a network, through a building management system, or through relay contacts for alarms.
Because the 9E 20000i is a high-capacity unit with hardwired outputs, installation should be planned carefully. Work with a qualified electrician to size the input and output cabling, plan the protective devices, and confirm the battery bank configuration. Check the communication card and cabling needs before ordering so that the UPS can be fully integrated into your monitoring setup.
For the right specification, consider your total connected load, the required backup time, and whether you need network monitoring. Speak to your supplier to confirm compatible accessories and any additional requirements for your site.
Eaton
9E 20000i, 20kVA / 16000W online UPS
Hardwired outputs, uses 9EEBM480 external batteries (max. 4)
Share this on your favourite channel: