





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Eaton 9E 2000i Rack2U is an online uninterruptible power supply from the Eaton 9E range, rated at 2000VA and 1800W. It is designed to protect sensitive IT and network equipment against power disturbances and to keep connected devices running through short outages. The unit operates on a 208-240V supply and is listed in the Eaton rack-mount range.
Power protection is a core requirement in any environment where downtime is costly. The 9E 2000i uses online double-conversion operation, meaning the connected load is always supplied from the UPS inverter rather than switching over when a fault occurs. Voltage dips, spikes and frequency variations are therefore filtered before reaching the equipment.
Six IEC C13 outlets give room to power a server, a switch, a storage array and monitoring equipment from a single unit. Plan your cable routing so that high-priority devices are on the protected outlets and any less critical loads are kept on separate circuits where appropriate.
Runtime depends on the load connected and the battery configuration. Where longer backup is needed, up to four 9EEBM72R external battery modules can be added. These are sold separately and are not included with the UPS. Confirm the battery count and cabling with your supplier before installation.
Install the unit in a ventilated rack location with adequate clearance, and make sure the input supply matches the 208-240V rating. Keep external battery modules in the same rack or an adjacent location, connected according to the supplier’s cabling guidance. A qualified installer or the reseller can advise on the correct configuration for your load.
The 9E 2000i combines a compact two-unit footprint, six outlets and expandable battery support in one online unit. It suits businesses that want reliable, continuous protection for IT equipment without the space demands of a larger system.