





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Eaton
1600VA line-interactive UPS, AVR 230V, Rack/Tower
4x C13 battery outlets, 4x C13 surge only, USB comm port
The Eaton Ellipse PRO 1600 IEC is a 1600VA line-interactive uninterruptible power supply for protecting computers, network equipment and other sensitive electronics on a 230V mains supply. It is built for the everyday power problems that interrupt work: brownouts, voltage spikes, and short outages that can corrupt files or stop a server mid-task.
The Ellipse PRO range sits in Eaton’s line-interactive family, which means the UPS continuously monitors incoming power and corrects minor deviations on its own. Instead of switching to battery each time the voltage moves, it uses automatic voltage regulation (AVR) with booster and fader functions to bring the output back into a safe range. This keeps the battery in reserve for real outages and helps make the supply steadier for the equipment downstream.
Power inlet and outlet types are IEC, so standard IEC C13 and C14 cords connect the equipment and the mains feed. Plan cable routing with the outlet layout in mind, since the four surge-only outlets are intended for devices that do not need battery support.
The four battery-backed C13 outlets are for the equipment you most need to keep running through a short outage, such as a managed switch, a router, a workstation or a small storage device. The four surge-only C13 outlets give protection against voltage spikes and transients but do not provide battery backup. They suit printers, monitors, speakers, chargers or other loads that do not need to stay powered when mains fails.
Before connecting equipment, add up the expected load of the battery-backed group. A UPS with a 1600VA rating should not be loaded to its limit, and keeping headroom leaves room for start-up surges and future expansion. Heaters, kettles, laser printers and similar high-draw devices are better kept on the surge-only outlets or plugged directly into the wall.
The USB communication port lets a computer read the UPS status, such as input voltage, load level and battery condition, through compatible monitoring software. During a prolonged power failure, that software can trigger an orderly shutdown of the protected systems so that files are saved and operating systems close cleanly. This is especially useful for unattended equipment, such as a file server running overnight in a small office.
Place the unit where air can flow freely around its vents, and keep it away from heat sources and direct sunlight. Mount or stack it according to the guidance supplied with the product, and do not block the cooling path. Connect the USB cable to the host computer before installing monitoring software, and test the shutdown settings on a non-critical machine first so you know how the system will behave in a real outage.
Plug the UPS directly into a wall socket rather than into a power strip or extension lead, because a second extension can reduce protection and add load that the UPS was not designed to carry. Check the outlet layout before you start so that the most critical equipment sits on the battery-backed group.
The Ellipse PRO 1600 IEC combines voltage correction, surge protection and a shutdown-capable communication link in a single compact unit. It is a sensible choice where a full online UPS is more than the site needs, but a plain surge protector would leave equipment exposed to short outages and unstable voltage. Used within its rated load and set up with the right outlet plan, it gives dependable protection for a focused set of critical devices.
Eaton
1600VA line-interactive UPS, AVR 230V, Rack/Tower
4x C13 battery outlets, 4x C13 surge only, USB comm port
Share this on your favourite channel: