





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
EPSON
Maintenance Box for Tx700/Px500 large format printers
Part number C13S210115
The Epson Maintenance Box, part number C13S210115, is a replacement waste ink container designed for the Tx700 and Px500 large format printer models. It is a consumable item that sits inside the printer and collects ink that is used during print head cleaning and other automatic maintenance cycles. Keeping this box in good order is an important part of looking after a large format printer, because it prevents waste ink from building up inside the machine.
Large format inkjet printers use a series of cleaning routines to keep the print head nozzles clear. These routines push small amounts of ink out of the head and into a waste path, and that ink is held in the maintenance box. Printing itself also produces some waste, particularly during head alignment and when the printer checks its nozzles. The box is designed to hold this used ink safely until it is replaced.
When a maintenance box reaches its limit, the printer will normally stop or warn the operator before waste ink can overflow into the machine. Ignoring the warning can lead to ink leaks, staining of the printer interior and possible damage to internal parts. Replacing the box promptly is the safest way to keep the printer running and to protect the investment in the machine. Some printers also track the amount of waste ink internally, so the replacement message is driven by the printer’s own counter rather than by how long the box has been installed.
Fitting a new maintenance box is usually a quick job. The printer is first switched off or placed in its maintenance state as described in the user manual. The full box is then removed and the new one is installed in the same position. Operators should handle the old box with care, as it contains used ink, and wear gloves if available. Follow the manual for the exact steps for your model, and check the printer’s control panel or driver software after installation to confirm that the warning has been reset.
This maintenance box is suited to businesses and departments that operate a large format Epson printer on a regular basis. Typical users include sign and graphics companies, architectural and engineering offices, photographic studios, poster and display printers, and education or design facilities. In these environments the printer may run for many hours each week, so having a spare box ready helps avoid interruptions to production.
Because the maintenance box is a routine consumable, many operators keep one spare in stock. This means that when the printer displays a replacement message, the job can continue with minimal delay. When ordering, confirm that the part number matches your printer model, since maintenance boxes are specific to the printer series they support.
In short, the Epson Maintenance Box C13S210115 is a practical, necessary consumable for Tx700 and Px500 large format printers. It keeps waste ink contained, supports the printer’s maintenance routines, and helps the machine stay clean and reliable in daily use.
EPSON
Maintenance Box for Tx700/Px500 large format printers
Part number C13S210115
Share this on your favourite channel: