





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Hikvision DS-2TD2628-10/QA is a network bullet camera that combines a thermal imaging sensor and an optical camera in one housing. This bi-spectrum design lets you see heat signatures and visible detail at the same time, which helps when monitoring areas where lighting is poor or unreliable.
The thermal channel uses a 10mm lens with a 256×192 resolution. The optical channel uses an 8mm lens and delivers 4 megapixel video. Together they give you a thermal view for detecting people, vehicles or objects, and a sharp visible image for identifying them.
This model also includes a strobe light and an audio alarm. When the camera detects an event, the strobe and the audible warning can be used to alert intruders that they have been seen, which can deter unwanted activity before it escalates.
Bullet cameras like this one are built for fixed mounting. They are typically installed on walls, poles or eaves to watch driveways, perimeter fences, car parks, yards, warehouses and other outdoor sites. Thermal cameras are often chosen for perimeter security because they work in darkness, fog and haze where a standard camera struggles.
The DS-2TD2628-10/QA is a good fit for security installers and businesses that need round-the-clock monitoring with an active deterrent. It is sold as part of Hikvision’s HeatPro and thermal range within the IP video product line.

The Hikvision DS-2TD2628-10/QA is a network bullet camera designed for outdoor surveillance where you need more than a standard visible-light view. It combines a thermal imaging channel and an optical channel in a single bullet housing, so one camera can show you both the heat signature of a person or vehicle and the visible detail that helps you identify it.
Thermal imaging detects infrared radiation given off by objects, so it does not rely on visible light. This makes the camera useful for sites where darkness, glare, fog, dust or haze would reduce the performance of an ordinary camera. Because the optical channel is also present, you still get a recognisable colour or detail image when conditions allow.
In Hikvision’s camera codes, the number in brackets or after the dash usually refers to the lens size. In this case, the thermal lens is 10mm and the optical lens is 8mm, as stated in the product description. The suffix /QA is part of the model code; check the official Hikvision datasheet for the exact meaning of that suffix and the full specification set before ordering.
The two channels complement each other. The thermal image is used to pick up movement and heat signatures across a wide area, even in total darkness. The optical image then gives you the visible detail you need to confirm what is happening, such as the colour of a vehicle or the clothing of a person. Operators can use both views to reduce false alarms and to make faster, better-informed decisions.
The strobe light and audio alarm give the camera an active role in site security. A flashing light and an audible warning can make intruders aware that they have been detected, often before any action is needed from a guard or a response team. This is useful at gates, loading bays, storage yards and other places where an early warning is valuable.
Bullet cameras are normally mounted on walls, poles or brackets, aimed at the area to be covered. Plan the position so that the thermal and optical fields of view overlap the zones you need to watch. Check the mounting and power requirements in the product documentation, and make sure the network connection and recording equipment are compatible with the camera before installation. Your installer or supplier can help confirm the setup for your site.
This camera is intended for security integrators, installers and businesses that need reliable monitoring in difficult lighting or weather. It works well as part of a larger Hikvision IP video system, where it can be combined with network video recorders, other IP cameras and management software to cover an entire site.
The Hikvision DS-2TD2628-10/QA is a network bullet camera that combines a thermal imaging sensor and an optical camera in one housing. This bi-spectrum design lets you see heat signatures and visible detail at the same time, which helps when monitoring areas where lighting is poor or unreliable.
The thermal channel uses a 10mm lens with a 256×192 resolution. The optical channel uses an 8mm lens and delivers 4 megapixel video. Together they give you a thermal view for detecting people, vehicles or objects, and a sharp visible image for identifying them.
This model also includes a strobe light and an audio alarm. When the camera detects an event, the strobe and the audible warning can be used to alert intruders that they have been seen, which can deter unwanted activity before it escalates.
Bullet cameras like this one are built for fixed mounting. They are typically installed on walls, poles or eaves to watch driveways, perimeter fences, car parks, yards, warehouses and other outdoor sites. Thermal cameras are often chosen for perimeter security because they work in darkness, fog and haze where a standard camera struggles.
The DS-2TD2628-10/QA is a good fit for security installers and businesses that need round-the-clock monitoring with an active deterrent. It is sold as part of Hikvision’s HeatPro and thermal range within the IP video product line.
Share this on your favourite channel: