





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
Layer 2 smart managed PoE switch, 16 x 10/100M PoE ports, 2 Gigabit combo ports
802.3af/at PoE, 230W PoE power budget, up to 300 m PoE…
The Hikvision DS-3E1318P-EI is a Layer 2 smart managed switch with Power over Ethernet (PoE) built in. It is designed for installers who need to power and connect a group of network devices from a single, managed point. With sixteen 10/100M RJ45 PoE ports and two Gigabit combo ports, it brings together power delivery and data switching in one unit.
Many security and networking installations need cameras, wireless access points and intercoms that are mounted away from a power outlet. Running a separate power supply to each device adds cost and time. A PoE switch carries both power and data over a single Ethernet cable, so the switch takes over the job of supplying power and the cabling stays simple.
PoE allows one cable to deliver both electrical power and data. The 802.3af and 802.3at standards cover the power levels that most IP cameras, access points and intercoms require. The 230W power budget is the total available for all PoE ports together, so the installer should plan the load so that the connected devices do not exceed it.
The two Gigabit combo ports give a faster link back to the main network. A combo port can be used with a copper cable or with a fibre SFP module, which allows the switch to reach a core switch or a distant network segment. The 10/100M ports serve the connected devices.
As a smart managed switch, the DS-3E1318P-EI can be set up to control how ports and traffic behave, which suits sites where the network needs to be organised rather than left at default settings. This helps installers keep a larger installation tidy and easier to maintain.
The switch suits IP CCTV systems, where it powers cameras and carries their video back to a recorder. It is also useful for wireless access points that need power and data at ceiling or wall height, for access control readers and intercom units at entrances, and for small office or site networks that need a single managed point for powered devices.
Because PoE devices can be placed up to 300 metres from the switch, the switch can often sit in a central comms cupboard while the cameras and access points are mounted where they are needed. Before installing, check that the total power draw of the connected devices stays within the 230W budget, and that the uplink ports match the cabling and SFP modules you intend to use.
Hikvision
Layer 2 smart managed PoE switch, 16 x 10/100M PoE ports, 2 Gigabit combo ports
802.3af/at PoE, 230W PoE power budget, up to 300 m PoE…
Share this on your favourite channel: