





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
32-channel 1U 4K AceSense network video recorder, 256Mbps bandwidth, 2 SATA interfaces

The Hikvision DS-7632NXI-K2 is a professional network video recorder (NVR) in the Hikvision Pro Series with Smart Function. It is designed to receive, record and play back video from up to thirty-two IP cameras at the same time. Its compact one rack unit (1U) chassis makes it suitable for server rooms, comms cabinets and security control rooms where rack space is limited.
The model number tells you the main features: DS-7632 is the 32-channel NVR family, N means it is a network recorder, and XI denotes the Pro Series hardware generation. The product description adds that the unit supports 4K video from AceSense cameras, has a 256Mbps incoming bandwidth and provides two SATA interfaces for internal storage.
Higher resolution means more pixels on the screen, so faces, number plates and small items are easier to identify. Each 4K stream carries more data than a standard definition stream. The 256Mbps bandwidth rating sets how much combined video traffic the recorder can take in. Before installing, add up the bitrate of all cameras you plan to connect and make sure the total stays within this limit, leaving some headroom for playback and remote viewing.
Recorded video is written to hard drives, so storage size controls how many days of footage you keep. With two SATA interfaces, the recorder can hold two internal drives. Use drives designed for continuous surveillance recording, since general desktop drives are not built to write video all day and night. The number of days you can store depends on the drive capacity, the resolution, the frame rate and the recording mode. Work this out before buying drives so that your retention meets any policy you must follow.
An NVR does not record analogue signals. It receives video over the network from IP cameras, so the recorder and cameras should be on the same network segment or correctly routed to each other. Plan IP addresses in advance, and keep the camera network separate from general office traffic where possible. A managed switch with enough ports and power for your cameras is usually part of the same installation.
Mount the unit in a ventilated rack position and keep it on a clean, stable power supply, ideally with a UPS so recording is not lost during short outages. Install and format the drives before adding cameras. Check firmware on the Hikvision website and apply updates from a trusted source. Confirm that the cameras you use are supported by this model, since channel count and resolution limits apply to the whole system.
In short, the Hikvision DS-7632NXI-K2 is a practical, rack-ready 32-channel 4K recorder for IP camera systems that need dependable central recording, with two internal SATA drive bays for storage.
Hikvision
32-channel 1U 4K AceSense network video recorder, 256Mbps bandwidth, 2 SATA interfaces
Share this on your favourite channel: