Lenovo South Africa Channel Awards 2
Lenovo South Africa Channel Awards
Congratulations to our Server Team. Distributor of The Year!
ThinkSystem Tower Servers
Modernize to boost your business with Windows Server 2022.
Think Big. Think Lenovo. ThinkSystem Tower Servers.
Lenovo F1

INFRASTRUCTURE TEAM

+27 (0) 11 237 1000

INFRASTRUCTURE TEAM

Hikvision
DS-KAB805-S1 Rain Shield

Hikvision
Rain shield for the K1T805 series
Weather protection accessory for access control terminals

SKU DS-KAB805-S1 Category Brand:
Share

Hikvision DS-KAB805-S1 Rain Shield for K1T805 Series Access Control Terminals

Hikvision <br>DS-KAB805-S1 Rain Shield

The Hikvision DS-KAB805-S1 is a rain shield made for the K1T805 series of Hikvision access control terminals. Outdoor access control points face a difficult environment. Rain, splashing water, wind-blown moisture and strong sunlight can all reduce the performance of a terminal and shorten its working life. This accessory is designed to sit over the front of a compatible K1T805 series unit and give it additional protection from the weather, so that users can continue to identify themselves at the door in typical outdoor conditions.

Hikvision access control products are widely used in commercial buildings, residential estates, schools, hospitals, factories and car parks. Where a terminal faces the weather, a dedicated rain shield is a practical addition. It is a straightforward accessory that works alongside the terminal rather than replacing any part of the access control system.

Product overview

The DS-KAB805-S1 belongs to Hikvision’s access control accessory range and is supplied as a separate item. It is intended for use with the K1T805 series. Because it is an accessory, it does not provide access control functions on its own. The terminal, power supply, controller and any software needed for user enrolment and door management remain required components of the installation.

Key features and specifications

  • Product type: rain shield accessory for access control terminals
  • Compatible range: Hikvision K1T805 series
  • Intended use: outdoor and semi-exposed entrance points
  • Brand: Hikvision
  • Model number: DS-KAB805-S1
  • Supplied as a separate accessory, sold with the terminal range rather than as a stand-alone access control device

Please refer to the official Hikvision documentation or your supplier for the exact dimensions, mounting method, materials and environmental rating of the shield before installation.

Typical uses

Installers and security integrators use rain shields in several common situations. An outdoor pedestrian gate may have a face recognition terminal mounted on a pillar where it is open to rain from one direction. A vehicle entrance may have a terminal beside a gate where water runs down from a wall or roof. A building entrance with only a small canopy may still allow water to reach the terminal during storms. In each case, a shield helps keep the unit dry and clear.

The shield can also support a cleaner look. Terminals with water marks, dust or streaks on the lens or screen can look untidy and may be harder for users to read. Protecting the front of the unit helps the terminal remain presentable and easier to use over time.

Compatibility and ordering

Before ordering, confirm that the terminal you plan to install is part of the K1T805 series. Check the terminal model label or the supplier documentation. Ask your installer whether the shield suits the mounting position and whether any additional brackets or fixings are required. If the terminal is installed in a location with strong wind, heavy rain or direct spray, discuss the mounting arrangement with your installer so that the shield and terminal are both properly secured.

Installation considerations

Installation should be carried out by a qualified technician who understands access control wiring and outdoor mounting. Plan the cable route so that it is protected from water ingress. Check that the shield does not block the camera, fingerprint sensor, keypad or display of the terminal. Test the terminal after installation to confirm that face recognition or card reading works as expected with the shield in place.

Care and maintenance

Inspect the shield and terminal regularly, especially after storms or high winds. Remove leaves, dust and debris that collect around the unit. Clean the terminal lens and screen with a soft, dry or slightly damp cloth, following the manufacturer guidance. Avoid harsh chemicals that may damage surfaces or seals.

Why choose this accessory

The DS-KAB805-S1 gives installers a simple way to add weather protection to a compatible Hikvision access control terminal. It suits projects where the terminal must stay in service through the seasons, and where the owner wants a tidy, well-protected entrance. For more information on the accessory, its compatibility or how it fits into a wider access control project, please contact our team.

SKU DS-KAB805-S1 Category Brand:

Hikvision
DS-KAB805-S1 Rain Shield

Hikvision
Rain shield for the K1T805 series
Weather protection accessory for access control terminals

Share this on your favourite channel:

Sign Up & Register

Mustek’s Infrastructure Technology Team are one of the largest suppliers of infrastructure technology in the country and on the continent. Register to become a reseller. Already a reseller?

Sign up for the latest pricelists, specials and offers.

Are you registered as a reseller?*
Area of interest?*

UPS Q&A

Keep up to date with the latest product developments from our divisions and outstanding solutions that will inspire you.

UPS Configuration Questionnaire

Ready to talk