Lenovo South Africa Channel Awards 2
Lenovo South Africa Channel Awards
Congratulations to our Server Team. Distributor of The Year!
ThinkSystem Tower Servers
Modernize to boost your business with Windows Server 2022.
Think Big. Think Lenovo. ThinkSystem Tower Servers.
Lenovo F1

INFRASTRUCTURE TEAM

+27 (0) 11 237 1000

INFRASTRUCTURE TEAM

Hikvision
DS-PDP18-HM-WE 868MHz AX PRO Wireless Double PIR Detector

Hikvision
868MHz two-way wireless outdoor PIR detector, 18m/90° detection, IP65
Battery: 2 x CR123A (included), up to 5 years

SKU DS-PDP18-HM-WE Category Brand:
Share

Hikvision DS-PDP18-HM-WE: Outdoor Wireless Double PIR Detector for the AX PRO System

Hikvision <br>DS-PDP18-HM-WE 868MHz AX PRO Wireless Double PIR Detector

The Hikvision DS-PDP18-HM-WE is an 868MHz wireless double PIR detector designed for the Hikvision AX PRO intrusion alarm system. It is intended for outdoor use, where it can watch over boundaries, yards, driveways and the exterior walls of buildings. Its two-way wireless link and weather-resistant housing make it a practical choice for sites where running cables is difficult or not possible.

How the Detector Works

The detector uses two passive infrared sensing elements. Infrared detectors respond to changes in heat patterns caused by a moving body, and the double PIR arrangement is intended to help the unit distinguish real movement from less significant changes. When movement is detected, the detector sends a signal to the AX PRO control panel over 868MHz two-way Tri-X wireless technology, so the panel can respond according to how the system has been set up.

Frequency hopping is built into the wireless link. By changing channels, the detector helps keep transmissions reliable when there is interference or an attempt to jam the signal. The stated RF range is 1,600 m in open space, although real-world range depends on the site, building materials and obstacles.

Key Specifications

  • Model: DS-PDP18-HM-WE
  • Series: Hikvision AX PRO, 868MHz wireless
  • Sensor type: Double PIR
  • Wireless: 868MHz two-way Tri-X technology with frequency hopping
  • RF range: 1,600 m (open space)
  • Detection range: 18 m / 90 degrees
  • Mounting height: 2.5 to 3 m (high mount) or 0.8 to 1.2 m (low mount)
  • Enrolment methods: power up, Remote ID, QR code
  • Signal strength indication (SSI) for installation checks
  • Configuration: fully remote through the APP
  • Battery: 2 x CR123A, included, easy to replace
  • Battery life: 5 years when triggered 20 times per day
  • Weather resistance: IP65, suitable for outdoor application
  • Bracket: external bracket included

Installation and Setup

The detector supports two mounting heights, which gives installers some flexibility. A high mount of 2.5 to 3 m suits a wall position above typical reach, while a low mount of 0.8 to 1.2 m suits lower positions where the coverage needs to be adjusted. The supplied external bracket is used for outdoor mounting.

Enrolment can be carried out in one of three ways: by powering up the device, by using its Remote ID, or by scanning a QR code. Signal strength indication helps the installer confirm that the detector has a good link to the control panel before the site is finished. Once the unit is on the system, settings can be changed remotely through the APP, which saves repeat visits to the site.

Power and Maintenance

The detector is powered by two CR123A batteries, which are included with the unit. The batteries are designed to be easy to replace. The supplier states a battery life of up to five years when the detector is triggered 20 times per day. Actual battery life will depend on how often the detector is triggered and on the environment, so it is sensible to keep a record of installation dates and check the system periodically.

Typical Uses

  • Perimeter coverage for outdoor yards and gardens
  • Driveways, side gates and service entrances
  • Outdoor areas of commercial premises, storage yards and farms
  • Adding outdoor zones to an existing AX PRO wireless alarm system
  • Sites where cabling is impractical and a wireless detector is preferred

Who It Is For

This detector suits installers and property owners who already use, or plan to use, a Hikvision AX PRO wireless intrusion alarm. Because it is designed for the AX PRO range, it should be matched to a compatible AX PRO control panel and accessories. Check the system requirements with your installer or the Hikvision documentation before purchase.

In summary, the DS-PDP18-HM-WE combines a double PIR sensor, 868MHz two-way wireless communication, flexible mounting heights, remote configuration and an IP65 outdoor housing. It is a focused choice for adding reliable outdoor motion detection to a wireless alarm system.

SKU DS-PDP18-HM-WE Category Brand:

Hikvision
DS-PDP18-HM-WE 868MHz AX PRO Wireless Double PIR Detector

Hikvision
868MHz two-way wireless outdoor PIR detector, 18m/90° detection, IP65
Battery: 2 x CR123A (included), up to 5 years

Share this on your favourite channel:

Sign Up & Register

Mustek’s Infrastructure Technology Team are one of the largest suppliers of infrastructure technology in the country and on the continent. Register to become a reseller. Already a reseller?

Sign up for the latest pricelists, specials and offers.

Are you registered as a reseller?*
Area of interest?*

UPS Q&A

Keep up to date with the latest product developments from our divisions and outstanding solutions that will inspire you.

UPS Configuration Questionnaire

Ready to talk