





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Hikvision IC S50 is a Mifare 1 contactless smart card designed for use in access control systems. It is a simple, convenient way to give people entry to doors, gates and restricted areas without fumbling for keys or codes. A user simply holds the card near a compatible reader, and the system checks whether the card is authorised to open the door.
The card operates at 13.56 MHz, the high-frequency band used by the Mifare 1 standard. Because the card needs no battery and no physical contact with the reader, it wears well and can be used many times a day in busy entrances. Its thin card format also makes it easy to carry in a wallet or on a lanyard.
The IC S50 is part of the Hikvision access control range, which includes card and fingerprint readers, face recognition terminals, door controllers and locks. Cards like this one are commonly issued in batches to staff, residents, visitors or contractors, so each person can be given access that suits their role. When a card is lost or no longer needed, it can be removed from the system and replaced without changing the door hardware.
Typical settings include offices, schools, apartment blocks, factories, clinics and estates where controlled entry is needed. Facility managers often use cards for time-based access, such as allowing cleaners in only during certain hours. Cards are also easy to add when a site grows, since they do not require new wiring at each door.
Compatibility with a particular reader or controller should be confirmed against the Hikvision access control documentation before ordering, so the cards match the rest of the installation.

The Hikvision IC S50 is a Mifare 1 contactless smart card made for everyday access control. It belongs to the Hikvision access control family, which is used to manage who can enter buildings, rooms and gates. Instead of a metal key or a numeric code, the person presents a card to a reader, and the access control system decides whether the door should open. This makes the process quick, discreet and easy to manage from one central point.
Contactless cards such as the IC S50 suit sites that have a steady flow of people, from offices and schools to residential complexes and industrial premises. They reduce the need to hand out and collect physical keys, and they make it simpler to remove access from a person who leaves the organisation. Because the card carries no battery, there is nothing to replace, and it can be carried in a wallet, bag or on a staff badge holder.
When the card is presented to a reader, the reader sends a radio signal that powers the chip inside the card. The card replies with its stored identification, and the reader passes this to the access control system. If the card is registered and has permission for that door at that time, the system releases the lock or opens the gate. If not, access is refused and the event can be logged. Because the exchange happens across a short distance, the card can be read quickly without being removed from a pocket or bag, although the exact read range depends on the reader in use.
The IC S50 is well suited to a range of settings. In offices, it can control entry to the main door, server rooms and staff-only areas. In schools and colleges, cards can be issued to pupils and teachers, with different rights for different buildings. Residential estates and apartment blocks often use cards for pedestrian gates, lifts and parking entrances. Factories and warehouses use them to restrict access to hazardous or high-value areas, while clinics and laboratories may use them to keep sensitive rooms controlled.
Good card management keeps an access system secure. Each card should be recorded against a named person or role, so that permissions can be changed or withdrawn at any time. When an employee leaves or a card is reported lost, it should be disabled in the system straight away. New cards can be added without changing the door hardware, which keeps the cost of growing or changing an installation low. Keeping a small stock of spare cards also helps when new people join the site.
Before ordering, check that the IC S50 matches the reader, controller and software used in the existing installation. The card is a Mifare 1 type operating at 13.56 MHz, so any reader in the same system should support that standard. If a site uses other access control hardware, it is worth confirming compatibility first to avoid delays. Hikvision product documentation and the installer’s advice are the best guides for this.
In summary, the Hikvision IC S50 Mifare 1 contactless smart card offers a practical, battery-free way to manage entry for people across homes, offices and commercial sites. It is a simple component that works best when it is matched to a well-planned access control system.
The Hikvision IC S50 is a Mifare 1 contactless smart card designed for use in access control systems. It is a simple, convenient way to give people entry to doors, gates and restricted areas without fumbling for keys or codes. A user simply holds the card near a compatible reader, and the system checks whether the card is authorised to open the door.
The card operates at 13.56 MHz, the high-frequency band used by the Mifare 1 standard. Because the card needs no battery and no physical contact with the reader, it wears well and can be used many times a day in busy entrances. Its thin card format also makes it easy to carry in a wallet or on a lanyard.
The IC S50 is part of the Hikvision access control range, which includes card and fingerprint readers, face recognition terminals, door controllers and locks. Cards like this one are commonly issued in batches to staff, residents, visitors or contractors, so each person can be given access that suits their role. When a card is lost or no longer needed, it can be removed from the system and replaced without changing the door hardware.
Typical settings include offices, schools, apartment blocks, factories, clinics and estates where controlled entry is needed. Facility managers often use cards for time-based access, such as allowing cleaners in only during certain hours. Cards are also easy to add when a site grows, since they do not require new wiring at each door.
Compatibility with a particular reader or controller should be confirmed against the Hikvision access control documentation before ordering, so the cards match the rest of the installation.
Share this on your favourite channel: