





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
MECER
25U 19-inch black floor-standing network cabinet, 800 x 1000mm, perforated door
Max load 800Kgs
The MECER AP8025.PER.B is a black 19-inch floor-standing network and server cabinet from the MECER range. It provides 25 rack units (25U) of mounting space inside an 800 x 1000mm footprint, making it suitable for a busy network room, server closet or equipment area where many devices need to be housed in one secure, organised enclosure.
The model code tells you the key facts. AP8025 indicates the cabinet family and size, .PER means the front door is perforated, and .B means the finish is black. Knowing this helps when you compare it with the glass-door versions in the same range.
The cabinet uses a welded frame with four vertical uprights that carry the 19-inch mounting rails. The uprights are the main structure for holding equipment, so their correct fitting matters when you build the rack. The four feet support the cabinet on the floor and keep it level once it is placed. The gland plates are fitted at the base or top of the cabinet so cables can enter neatly, which reduces clutter and protects cable runs from strain.
The perforated door gives the front of the cabinet an open face. This allows air to move through the rack, which helps devices such as switches, servers and storage units release heat during everyday use. Good airflow is important in any rack that holds active equipment, because it supports stable operation and reduces the chance of equipment overheating.
The rated maximum load of 800Kgs means the cabinet can carry substantial equipment, including full stacks of servers, battery units or heavier network hardware. Before loading, check the weight of each device and spread the heaviest items low in the cabinet to keep the rack stable. Place the cabinet on a firm, level floor, and make sure there is enough clearance at the front and back for doors to open and for cables to be routed.
The MECER AP8025.PER.B suits IT managers, network installers and businesses that need a floor-standing rack with a large height, a generous depth, a high load rating and a ventilated front. It is also useful for planning a rack layout where equipment must be grouped and cabled cleanly from the start.
When ordering, confirm the exact requirements for your equipment, such as mounting depth and cable entry, against the product details supplied with the cabinet.
MECER
25U 19-inch black floor-standing network cabinet, 800 x 1000mm, perforated door
Max load 800Kgs
Share this on your favourite channel: