





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
MECER
4U 19-inch IP55 outdoor swing frame wall-mount cabinet
550mm x 550mm, grey, active KIT version
The MECER IP55 4U swing frame wall-mount cabinet is a grey 19-inch rack enclosure designed for network, communications and security equipment that must operate outdoors or in demanding industrial areas. With four rack units of usable mounting space and a swing frame, it combines weather protection with convenient access to the equipment inside.
Many network and CCTV installations cannot be housed in a building. Cabling, switches, routers, wireless access points, power supplies and recorders often need to be mounted on an external wall, next to a gate, on a building facade or inside a plant. A standard indoor cabinet is not built for rain, dust or washdown conditions, so an IP55 outdoor cabinet is the practical choice for those sites.
IP55 is an ingress protection rating. The first digit, 5, means the enclosure is protected against dust to a level that prevents harmful accumulation. The second digit, 5, means it is protected against low-pressure water jets from any direction. In plain terms, the cabinet is designed to keep out dust and rain and to withstand water spray during normal outdoor use. It does not mean the cabinet is submersible.
Equipment in a sealed outdoor enclosure generates heat that has nowhere to escape, and high internal temperatures shorten the life of electronics. A filtered fan base plate draws air through a filter to move heat out while keeping dust out. For that reason the active KIT version is the better choice where switches, recorders or power equipment run continuously inside the cabinet. Where the equipment is low-power or the site is sheltered, a passive version may be sufficient, but the environment should be checked first.
Before mounting, confirm that the wall can carry the combined weight of the cabinet and the equipment. Plan the cable entry points so that cables enter from below or through sealed glands, which helps keep water away from connections. Allow enough clearance in front of the swing frame so it can open fully, and leave space around the cabinet for airflow and service access. Check your equipment’s depth and mounting rails against the cabinet before ordering, since a wall-mount cabinet has limited depth.
Inspect door seals, cable glands and the fan filter at regular intervals, especially in dusty or coastal locations. Clean or replace the filter when airflow drops, and check that the grounding and any internal fans are working. Keeping the seals intact is the main way to preserve the IP55 rating over the life of the cabinet.
Overall, this MECER IP55 swing frame cabinet suits installers and facilities teams who need a robust, weather-resistant, 4U wall-mounted rack for outdoor or harsh-environment equipment. Confirm the dimensions, mounting requirements and the active or passive version against your project before placing an order.
MECER
4U 19-inch IP55 outdoor swing frame wall-mount cabinet
550mm x 550mm, grey, active KIT version
Share this on your favourite channel:



