





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
MECER
42U IP55 ventilated outdoor 19-inch cabinet, 2050mm high, 600x1000mm
Grey finish
The MECER IP55 Ventilated Outdoor Cabinet 42U is a floor-standing 19-inch enclosure for network, server and communications equipment that has to operate outdoors or in harsh industrial spaces. With 42 rack units of usable height, a 600mm wide and 1000mm deep footprint and an overall height of 2050mm, it brings a full-height rack solution to locations where an indoor cabinet would not survive.
The cabinet belongs to the MECER IP55 outdoor range of floor-standing ventilated cabinets. It is finished in grey mild steel, identified by the GRY suffix in the model code IP55V.6042.GRY, which gives the footprint and the 42U height. A stainless-steel finish is offered for the same range on special order, but this listing covers the grey version.
An IP55 enclosure protects the equipment inside against dust that could build up and damage electronics, and against water projected from jets from any direction. This is the reason the cabinet suits outdoor sites, loading areas, mining and factory floors, and any place where washing down or weather exposure is normal. Ventilation openings keep the enclosure from trapping heat, which matters because active network switches, servers and power devices produce warmth that has to leave the cabinet.
Telecom operators and internet service providers often use outdoor cabinets like this one to house access equipment at street level or at the edge of a network. Estates, campuses, municipalities and business parks use them for distribution points that feed buildings or CCTV cameras. Industrial sites use them to house controllers, data loggers and communication gateways near production lines. Surveillance installers use them as local hubs for recorders, switches and power supplies that serve outdoor cameras.
The 42U height gives plenty of room for a typical mix of equipment: switches and routers at the top, patch panels and cable managers in the middle, and power distribution and uninterruptible power supplies at the base. Standard 19-inch rails accept most common network and server hardware, so existing rack-mount devices can usually be moved into the enclosure without modification. Before ordering, measure the depth of your equipment and allow space at the back for cabling and airflow. Remember that a 42U cabinet is tall and heavy when loaded, so plan the delivery, the floor or base the cabinet stands on, and the access route for installers.
Choose a level, stable base that can carry the cabinet and its contents. Plan cable entry at the base so that power and data cables enter without strain on the connectors. Earthing and surge protection should be designed in as part of the installation, particularly outdoors, where lightning and voltage spikes are a risk. Keep service access in mind, because cabinet doors and panels must be reachable for maintenance over the life of the installation.
If you need a large rack footprint outdoors and want a grey finish that matches the MECER IP55 range, this 42U 600x1000mm cabinet provides a robust, weather-resistant housing with full rack height. For a smaller installation, the same range includes shorter and narrower models. For a stainless finish, ask about the special order option. Confirm the exact fit, mounting and accessories with your supplier before committing to the build.
MECER
42U IP55 ventilated outdoor 19-inch cabinet, 2050mm high, 600x1000mm
Grey finish
Share this on your favourite channel: