





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
MECER
IP55 9U wall-mount 19″ outdoor cabinet, grey, 550mm x 450mm
Active KIT version with filtered fan base plate
The MECER IP55WM9U-ODG KIT is a 9U wall-mount 19-inch cabinet built for outdoor and harsh-environment network and equipment installations. It belongs to the MECER range of IP55 grey outdoor cabinets, which are designed to protect rack-mounted equipment from dust, moisture and weather where a standard indoor cabinet would not be suitable.
IP55 is an ingress protection rating. The first digit indicates protection against dust, and the second digit indicates protection against water jets. An IP55 enclosure is protected against dust ingress that could harm equipment and against low-pressure water jets from any direction. This makes the cabinet appropriate for outdoor mounting on walls, poles and similar structures, where rain, wind-blown dust and washing down may occur.
Codes marked KIT are active cabinets, which include the filtered fan base plate. The fan helps circulate air through the enclosure, so heat generated by switches, routers, converters and power equipment can escape. The filter limits the amount of dust drawn in. The alternative NBP code is a passive version without the fan base plate, supplied on special order. If your equipment produces heat or the cabinet sits in direct sun, the active KIT version is generally the more practical option, but confirm the requirements for your own installation.
With 9U of usable space, the cabinet can hold a combination of patch panels, network switches, routers, media converters, wireless equipment and small UPS units. A rack unit, or U, is 44.45mm of vertical height, so nine units give a substantial amount of mounting space for a wall-mount enclosure. The 450mm depth suits compact equipment. Because it is a wall-mount unit, it is well suited to locations where floor space is limited or where equipment needs to be raised above ground level.
Check the internal space you need by adding up the rack units of all equipment, plus space for cable management and ventilation. Confirm the mounting surface can carry the combined weight of the cabinet and equipment, and plan the cable entry points so that the IP rating is maintained. If you are unsure which version suits your site, ask for guidance on whether the KIT or passive version is the better match.
MECER
IP55 9U wall-mount 19″ outdoor cabinet, grey, 550mm x 450mm
Active KIT version with filtered fan base plate
Share this on your favourite channel: