





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The MECER plinth for CPS cabinet, 150mm high, in the 600 x 1200mm size, is a base accessory for floor-standing network cabinets. A plinth sits between the floor and the cabinet, lifting the enclosure to a set height and closing off the open base. For installers and facilities managers, it is a simple way to complete a cabinet installation and to make the area around the enclosure look organised.
Network and server cabinets are often installed in offices, data rooms, communications cupboards and industrial sites. In each of these settings the base of the cabinet matters. An open base lets dust, debris and loose cable offcuts collect under the equipment. A plinth closes that gap and creates a clean line between the cabinet and the floor.
The height of a plinth determines how much room there is beneath the cabinet. At 150mm, there is enough clearance for cables to enter from below, whether they come up through a floor opening or run from a cable tray. The height is also modest, so the overall installation height of the cabinet stays practical for access and for working at the rack.
When planning the cable route, measure the space you need before fixing the cabinet in place. Leave enough room for bend radius, and keep power and data cables separated where possible. A plinth of this height gives you that room without turning the base into an awkward gap.
The 600 x 1200mm footprint is the size sold for this cabinet, so the cabinet and plinth are designed to be used together. The plinth should sit level and square on the floor before the cabinet is placed on it. Check that the floor is flat, since an uneven base makes it harder to align the cabinet doors and panels. If you are fitting a cabinet with accessories such as fan trays or power distribution units, plan their position first so the plinth does not block any access you will need later.
Before ordering, confirm that the plinth matches the cabinet model you have, both in footprint and in intended use. Dimensions and fixing details should be checked against the cabinet specification, since this description does not list every fixing method or load rating. Once the plinth is in place, fit the cabinet on top, level it, and then route cables through the base opening.
Keep the area under the cabinet clear of loose items. A plinth keeps the base closed, but it is still good practice to tidy cables as they enter the cabinet and to label them for future maintenance. Good cable management at the base makes later changes faster and reduces the risk of accidental disconnections.
The MECER plinth for CPS cabinet, 150mm high, 600 x 1200mm, is a straightforward base accessory for floor-standing network cabinets. It raises the cabinet, closes off the base and gives room for cable routing. It suits server rooms, communications cupboards and commercial installations where a neat, finished cabinet base is needed.