Lenovo South Africa Channel Awards 2
Lenovo South Africa Channel Awards
Congratulations to our Server Team. Distributor of The Year!
ThinkSystem Tower Servers
Modernize to boost your business with Windows Server 2022.
Think Big. Think Lenovo. ThinkSystem Tower Servers.
Lenovo F1

INFRASTRUCTURE TEAM

+27 (0) 11 237 1000

INFRASTRUCTURE TEAM

Molex
18282-0251 Duplex LC OM4 Midcoupler

Molex
Duplex LC MM OM4 Midcoupler, Zirconia Sleeve, Flange Mount, Internal Shutter
Erika Violet

SKU 18282-0251 Category Brand:
Share

Molex 18282-0251 Duplex LC OM4 Multimode Midcoupler: Zirconia Sleeve, Flange Mounted, Erika Violet

The Molex 18282-0251 is a duplex LC midcoupler built for multimode OM4 fibre networks. It provides a protected joint where two LC fibre links meet, allowing structured cabling to be extended, rearranged and patched without cutting or splicing the fibre. For installers and network managers who work with Molex fibre components, this coupler is a practical way to build a clean, serviceable fibre link.

Fibre midcouplers are the connection points that sit between patch leads and backbone cables. Instead of joining two cables with a splice, the midcoupler holds two connectors face to face inside one housing. This makes changes easier, because a patch lead can be disconnected and reconnected at the coupler without disturbing the permanent fibre runs behind it.

Key features

  • Duplex LC format, with two LC ports for a two-fibre link
  • Multimode OM4 fibre application, as listed in the Molex midcoupler section
  • Zirconia ceramic sleeve that aligns the connector ferrules
  • Flange mounted, for fixing to a panel or fibre enclosure
  • Internal shuttered ports that cover the sleeve when no connector is inserted
  • Erika Violet colour variant from the Molex product range

Why the zirconia sleeve matters

The sleeve is the most important internal part of a midcoupler. It guides the two ferrules so their fibre cores meet as closely as possible. Zirconia is a ceramic material that is hard and dimensionally stable, which helps the alignment stay consistent through repeated connections. Good alignment supports a clean optical path and keeps the link performing as the cabling was designed to perform.

Why an internal shutter is useful

When a port is empty, an open sleeve can collect dust, and dust on a fibre end is a common cause of connection problems. The internal shutter closes the port when no connector is present and opens when a connector is inserted. This keeps the sleeve clean between connections and reduces the need for cleaning later. It is a simple feature, but it helps protect the link in busy patch areas.

Flange mounting

The flange lets the coupler be fixed directly to a panel, plate or enclosure. Once mounted, the connector ports are accessible from both sides of the mounting surface, so patch leads can be plugged in from the front of the panel and from the rear. Flange mounting keeps the coupler in a fixed position, which tidies the patch field and reduces strain on the connectors.

Colour and identification

The product is described as Erika Violet. Colour is useful in a fibre installation because it helps staff identify the type of link at a glance. In a Molex range, colour variants are shown with a suffix in the part number, and this coupler is the Erika Violet version of the 18282 series.

Typical uses

  • Server rooms and data centre patch fields
  • Backbone links between wiring cabinets in office buildings
  • Campus and multi-building fibre distribution
  • Patch points between structured cabling and active equipment
  • Upgrades or extensions of an existing OM4 multimode network

In each case, the coupler acts as a fixed meeting point. Permanent fibre stays in place, and the patch leads that connect to switches, servers and outlets can be changed as the network grows or moves.

Installation and handling

Fibre connectors should be kept clean before they are plugged into any coupler. Use the correct cleaning tools and follow the installation guidance supplied with Molex products. Avoid touching the ferrule ends, and do not force a connector into a port. Keeping the shutters and sleeves free of dust extends the life of the joint and makes future maintenance quicker.

Because the product description gives the coupler type, fibre type, sleeve material, mounting method, shutter feature and colour, these are the facts this listing relies on. For detailed optical performance values, mechanical dimensions and the full specification, refer to the Molex datasheet for the product.

The Molex 18282-0251 is a sensible choice for anyone building or maintaining an OM4 multimode fibre link who needs a clean, protected, flange mounted LC joint in a violet colour variant.

SKU 18282-0251 Category Brand:

Molex
18282-0251 Duplex LC OM4 Midcoupler

Molex
Duplex LC MM OM4 Midcoupler, Zirconia Sleeve, Flange Mount, Internal Shutter
Erika Violet

Share this on your favourite channel:

Sign Up & Register

Mustek’s Infrastructure Technology Team are one of the largest suppliers of infrastructure technology in the country and on the continent. Register to become a reseller. Already a reseller?

Sign up for the latest pricelists, specials and offers.

Are you registered as a reseller?*
Area of interest?*

UPS Q&A

Keep up to date with the latest product developments from our divisions and outstanding solutions that will inspire you.

UPS Configuration Questionnaire

Ready to talk