





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
24 fibre splice tray, sold in bags of 2 pieces
Article number AFR-00822

The Molex AFR-00822 is a 24-fibre splice tray sold in bags of two pieces. It belongs to the Molex fibre componentry range used in structured cabling networks. The tray gives a fibre installer a defined place to store fused splices, so that cores stay organised, protected and easy to trace.
In a fibre network, each fibre is joined by a splice, either fused or mechanical, and the join needs to be protected and kept free of tight bends. A splice tray holds these joins in a controlled arrangement. Without one, splices can be pulled, crushed or bent, which can increase signal loss and make future work harder. Using a proper tray is part of a tidy, maintainable installation.
The tray is intended for use inside a fibre enclosure or splice panel that accepts splice trays. Typical locations include a server or comms room, a building distribution point, a campus backbone chamber and a data centre row. Installers often fit several trays into one enclosure so that all the cores of a cable can be terminated and managed in one place.
Before fitting, confirm that the tray is compatible with the enclosure and fibre type in your design. Keep to the bend radius of the fibre, route tails neatly around the tray, and leave enough slack to allow future re-splicing. Use the Molex datasheet for the full product specification, including any mechanical or environmental limits.
Using a tray from the same range as your enclosures and cables helps the whole installation fit together. It simplifies planning, reduces the chance of a mismatch on site and keeps the documentation consistent for later testing and maintenance.
In summary, the Molex AFR-00822 gives installers a practical way to hold 24 fibre splices neatly in a fibre enclosure. Its two-piece bag makes it useful for both new builds and upgrades.
Molex
24 fibre splice tray, sold in bags of 2 pieces
Article number AFR-00822
Share this on your favourite channel: