





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
48-fibre OM3 multimode fibre optic cable, CST double sheath, PE insulated, black
Article CFR-00830
The Molex CFR-00830 is a 48-fibre OM3 multimode fibre optic cable designed for structured cabling networks. It is supplied in a black PE (polyethylene) insulated jacket with a CST double sheath construction, and the product description identifies it as an external (EXT) loose tube (LT) cable. It is a bulk cable intended for installers who need a high-count multimode fibre run between network points.
Fibre optic cable carries data as light pulses through glass fibres, which allows much higher bandwidth and longer reach than copper for the same cable path. Multimode fibre suits shorter distances inside buildings and campuses, while singlemode fibre is used for longer distances. OM3 is a laser-optimised multimode grade that supports higher data rates than older multimode fibre types.
A double sheath design adds a second protective layer around the fibre bundle. In practice this helps protect the fibres during pulling, handling and routing through cable trays, ducts and risers. For a high-count cable with many fibres in one jacket, this protection is important because a single damaged fibre can affect the entire installation test results.
Fibre cable of this type is normally installed by a qualified technician. Typical steps include planning the route, measuring the length required, pulling the cable through the pathway without exceeding the bend radius, and then terminating the fibres at distribution points using splice trays, cassettes or enclosures. Test results should be recorded once the installation is complete.
This cable is suited to building backbone runs, campus links between buildings, and fibre distribution from a main equipment room to patch panels on each floor. It is also used to interconnect data cabinets and to supply high-density fibre counts into a central distribution point. The 48-fibre count gives room for future expansion without installing a second cable.
Choose this product when your design calls for OM3 multimode fibre in a 48-fibre high-count cable with an external-rated black PE jacket. If your link runs over a longer distance, or uses a different fibre grade such as OM4 or singlemode, a different cable from the Molex range may be more suitable. Always confirm the exact specification against the Molex datasheet before ordering.
Molex
48-fibre OM3 multimode fibre optic cable, CST double sheath, PE insulated, black
Article CFR-00830
Share this on your favourite channel: