





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat6A U/FTP, 4 pair, 23 AWG solid copper, PE insulated
305m, blue, outdoor/underground application
The Molex CAA-00418 is a 305 metre reel of Category 6A unshielded-twisted-pair cable with an overall foil screen, sold for structured cabling projects that need a robust copper link. It belongs to the Molex copper range and sits in the outdoor and underground application group, which means it is intended for runs that leave the building or are buried or installed in ducts.
Structured cabling designers choose Category 6A when a network must carry 10 Gigabit Ethernet over the full 100 metre channel length. The U/FTP construction keeps each of the four pairs unshielded while wrapping the whole core in foil, a balance that offers good alien crosstalk control with a relatively simple installation process.
The description supplied with this item gives the core construction, conductor gauge, insulation type, length and colour. Some abbreviations in the original code, such as the NYL and Fca markings, are not expanded here because the exact meaning should be confirmed against the Molex datasheet. The datasheet is the authoritative source for jacket rating, bend radius, pulling tension, operating temperature and certification status, so check it before specifying the cable for a contract.
Because this is a bulk reel, the cable must be terminated on site with compatible connectors, outlets or patch panel modules. Use Category 6A rated terminations throughout the link, otherwise the channel performance will be limited by the weakest component. Keep pair twists intact up to the point of termination, observe the minimum bend radius and avoid excessive pulling tension during installation. Where the cable is run outdoors, check that the sheath and any ducting or sealing arrangements suit the local environment.
After termination, each link should be tested with a certified cable tester to confirm that it meets the Category 6A performance limits. Keep the test results with the installation records, as they are often required for warranty or compliance purposes. Label both ends of each run clearly and record the route so that future maintenance and expansion are straightforward.
This reel suits installers, system integrators and IT departments who are building or upgrading outdoor and underground copper links and want a Molex-branded Category 6A cable. It is less suitable for short indoor patch connections, which are better served by pre-terminated patch leads or indoor-rated cable.
Molex
Cat6A U/FTP, 4 pair, 23 AWG solid copper, PE insulated
305m, blue, outdoor/underground application
Share this on your favourite channel: