





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat6 UTP patch cord, LS0H sheath, 568A/B wiring
2 metre, green
The Molex Cat6 UTP LS0H patch cord in green, 2 metres long, is a ready-made copper lead for structured network cabling. It connects a patch panel port to an active device such as a switch, router, server, access point or wall outlet. Molex makes this cord to be used within the Molex Cat6 system, so it sits neatly alongside Molex patch panels, DataGate outlets and Cat6 cable.
Patch cords are where most day-to-day changes happen in a network. Each time a device is moved, added or re-routed, a patch cord is what makes the connection. Choosing a cord with a clear colour, a defined length and a known wiring scheme makes those changes quicker and reduces mistakes in busy comms rooms.
The cord uses unshielded twisted pair construction, which is the standard form of Cat6 patch lead used in most office and commercial networks. The LS0H outer sheath is a low smoke, zero halogen compound. In a fire, cables with this type of jacket release far less dense smoke and no halogen gases compared with standard PVC sheathing. This is why LS0H is often specified for offices, schools, hospitals, public buildings and anywhere people gather in numbers.
The 568A/B designation refers to the pin-out used at each end of the lead. Both ends are terminated to the same scheme, so the cord is a straight-through connection. Keep this in mind when mixing cords from different suppliers, as the pin-out must match the patch panel and outlets used in the installation.
Molex uses a colour suffix in its patch cord codes. Green makes it easy to identify particular links, for example to separate voice, data, wireless or uplink connections in a cabinet. Many installers adopt a colour plan so that any technician can see at a glance which port serves which function.
A 2 metre cord is a practical length for short connections. It leaves enough slack to reach a port without creating a large loop of cable. Longer cords can be harder to manage, and excess slack can look untidy and restrict airflow in a cabinet. If your layout requires a different length, check the other lengths available in the Molex Cat6 patch cord range before ordering.
Route patch cords with the same care as permanent cabling. Avoid sharp bends, do not pull cords tight around cabinet edges, and use cable management bars to keep runs tidy. Label each end clearly so that the port it serves is always obvious. Keep the cord fully seated in the connector at both ends, and test the link after installation.
For best results, use Molex patch cords with Molex patch panels and outlets, and make sure the rest of the channel is Cat6 or higher. Mixing components from different manufacturers can work, but the overall performance is only as good as the weakest part of the link. Check the datasheet for the complete system details before designing a larger installation.
Whether you are building a new office network or refreshing an existing comms room, this green Molex Cat6 LS0H patch cord is a simple, clearly identified lead for everyday connections. Order a few spares in each colour so that replacements can be swapped in quickly when needed.
Molex
Cat6 UTP patch cord, LS0H sheath, 568A/B wiring
2 metre, green
Share this on your favourite channel: