





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
MOLEX
Cat6 UTP patch cord, LS0H sheath, 568A/B wiring
1.5 metre length
The Molex PCD-02002 range is a Cat6 unshielded twisted pair (UTP) patch cord for structured cabling. At 1.5 metres it is sized for short, tidy connections inside a network cabinet or at a work area. It is part of the Molex copper patch lead family, which is designed to work with Molex Cat6 patch panels, keystone jacks and outlets.
Structured cabling works best when every component belongs to the same system. Patch cords are the most visible part of that system, and they are the part that gets handled most often. A well-chosen patch cord reduces faults, keeps the rack neat and makes changes faster for the technician doing them.
LS0H cable is intended for places where people gather or where the building must be protected from fire damage. When it burns, LS0H jackets produce less smoke and no halogen gases, so visibility and air quality are kept better than with standard PVC jackets. Many building owners and project specifications ask for this type of jacket in common areas, ceilings, risers and cabinets that are close to people.
The 568A and 568B standards are the two recognised pin-outs for RJ45 terminations. They differ only in which pairs of wire swap positions. A patch cord that uses one standard at both ends is a straight-through cable, which is the usual choice for connecting a switch to a patch panel or a device to an outlet. Check the wiring scheme in use on the rest of the installation before ordering, so that every link follows the same convention.
Cat6 is the category most often specified for gigabit Ethernet and for the higher-speed links used in offices, schools, clinics and light industrial sites. Keeping the patch cord in the same category as the panels and outlets helps the whole channel perform as designed. Mixing categories in one link can limit what the link can carry, so it is good practice to match them.
Short patch leads are the right answer for most rack and desk connections. A 1.5 metre cord is long enough to reach from a patch panel to a switch mounted directly beneath it, or from a wall outlet to a desk device, without leaving a large loop of spare cable behind. Excess slack is a common cause of cluttered racks and blocked airflow, so the right length helps keep cabinets organised and cooler.
Before connecting, confirm that the wiring scheme at both ends matches. Route patch cords neatly with cable management, avoid tight bends, and keep them clear of power cables where possible. Label both ends so future technicians can trace each link quickly. Good cable management is a simple way to protect the investment in the structured cabling system as a whole.
The article number ends in an asterisk, which stands for the colour variants in this family. Choose the colour you need when ordering, and keep the same colour convention across the installation so that links are easy to identify.
MOLEX
Cat6 UTP patch cord, LS0H sheath, 568A/B wiring
1.5 metre length
Share this on your favourite channel: