





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Euromod keystone jack fascia, 25 x 50mm, unloaded (no jacks fitted), white
Article MEU-00073-02
The Molex Euromod Keystone Jack Fascia 25 x 50mm is a white outlet faceplate from the Molex structured-cabling range. It is supplied unloaded, which means it is delivered without keystone jacks fitted. This gives installers the freedom to select the copper or fibre keystone module that best suits the application, and to fit it on site.
Molex is known for its structured cabling components, including patch panels, DataGate and keystone outlets, Euromod modules and patch cords. The Euromod fascia belongs to this family of parts and is intended for use in a structured network where neat, organised outlets are needed at the point of use.
An unloaded fascia is a practical choice for projects where the jack type is not yet fixed. Some installations call for Cat6 or Cat6A copper jacks, while others need a fibre adapter or a mixed copper and fibre arrangement. By buying the fascia separately, you can match it to the exact module required and avoid paying for jacks you do not need. Installers who maintain a stock of blank faceplates also benefit, because one fascia can be fitted with different modules as jobs change.
The fascia is intended to be fitted into a matching Euromod opening, using the 25 x 50mm keystone format. Before installation, check that the jacks you intend to use are compatible with the Euromod fascia and the opening size. Refer to the Molex datasheet for the full list of compatible modules and adapter plates, as these details can change with product revisions. Terminate the cable and jack according to the manufacturer’s instructions, and test each outlet once it is complete.
Euromod keystone fascias are commonly used in the following settings:
Plan the layout before you start. Decide how many openings each faceplate needs, which jacks will be fitted and how the patch cords will be routed. Keep the cable bend radius within the recommended limits and avoid pulling the cable too tightly when it is terminated. Label each outlet clearly so that the patch panel and the outlet can be matched quickly during maintenance or future changes.
This listing refers to the unloaded version of the Euromod keystone jack fascia, in white. The product code carries a suffix that identifies the colour variant, so confirm the code against your project specification before ordering. If you need jacks, adapter plates or patch leads to complete the outlet, these are sold separately and should be chosen to match the fascia and your cabling standard.
Using a matched set of Molex components helps keep the installation consistent, which makes testing and troubleshooting easier over the life of the network. A neat, well-labelled outlet also supports faster moves, adds and changes in the future.
Molex
Euromod keystone jack fascia, 25 x 50mm, unloaded (no jacks fitted), white
Article MEU-00073-02
Share this on your favourite channel: