





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
OS2 single-mode fibre cable, 12 fibres
LSZH (low smoke zero halogen) sheath, I/O gel, dielectric MLT
The Molex LSZH OS2 I/O Gel, dielectric MLT 12f is a single-mode fibre optic cable designed for structured cabling installations. It combines the OS2 single-mode fibre classification with a low smoke zero halogen (LSZH) outer sheath, and it provides twelve fibres in one cable. It is supplied through Molex’s fibre range and suits installers building backbone and distribution links in commercial and data environments.
Fibre optic cable carries light rather than electrical signals, so it is not affected by electromagnetic interference and can cover longer distances than copper. Single-mode fibre has a very small core that allows a single light path, which is why it is used for longer runs and higher-capacity links than multimode fibre.
OS2 is the industry designation for low-attenuation single-mode fibre intended for indoor and outdoor use. Because it is single-mode, it is used with lasers and matching transceivers rather than the LED sources common with multimode cable. Always confirm that the active equipment at each end is rated for single-mode operation.
Cables installed in ceilings, risers, cable trays and shared spaces need a jacket that behaves safely in a fire. The LSZH sheath is designed to release little smoke and no halogen gases when burning. This is important for occupant safety and for protecting sensitive electronics from corrosive fumes. Local building regulations and the design brief will determine whether an LSZH jacket is required for a given route.
A dielectric cable has no metal elements, so it does not conduct electricity. This helps when the route runs near power cables, lightning-exposed areas or equipment with different earth potentials. Dielectric construction also means no metallic parts need to be earthed as part of the cable installation.
The twelve fibres should be terminated in a suitable fibre panel, splice tray or enclosure using connectors and tools matched to single-mode fibre. Follow the manufacturer’s bend radius and pulling tension limits during installation, and keep the cable away from sharp edges. After termination, test each fibre to confirm insertion loss and continuity before the link is put into service.
Select this product when you need a single-mode backbone with twelve fibres and an LSZH jacket. If your equipment uses multimode transceivers, or your route does not require an LSZH sheath, a different fibre specification may be more suitable. Speak to a structured-cabling specialist if you are unsure which fibre type or sheath your project needs.
Molex
OS2 single-mode fibre cable, 12 fibres
LSZH (low smoke zero halogen) sheath, I/O gel, dielectric MLT
Share this on your favourite channel: