





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat5e UTP LS0H patch cord, 568A/B wiring, 1 metre, blue
Article: PCD-01001-0H
The Molex PATCH CORD C5e UTP LS0H 568A/B is a one-metre Category 5e patch cord with unshielded twisted pair construction and a blue low-smoke, zero-halogen sheath. It is designed for short, tidy connections in structured cabling networks, where a patch lead links one point to another without any permanent wiring.
Patch leads are the short cables that connect the equipment side of a network to the fixed cabling. This one-metre cord keeps the run short, which limits slack and helps keep cabinets and desks neat. The blue colour helps identify the link at a glance in a busy patch field.
The 568A/B standards define the order of the eight conductors in an RJ45 plug. Because the cord follows the same standard at both ends, it works with the common straight-through wiring used between patch panels, outlets and switches. Installers should keep both ends on the same standard within a network to avoid faults.
The LS0H jacket releases less smoke and no halogen gases when burned. This is a useful property in buildings where people gather, or where cabling runs through ceilings, risers and enclosed service areas, and where smoke and corrosive fumes can be a hazard.
Colour coding is practical in network installations. A blue cord can be used for one type of link, such as desktop or data connections, while other colours mark different circuits. This makes moves, adds and changes easier to manage and reduces the risk of disconnecting the wrong port.
A one-metre cord suits connections where the equipment sits close to the patch panel or outlet. For longer runs, a longer patch lead in the same range may be more suitable. Keeping cords short avoids excess cable clutter behind desks and inside cabinets.
Handle the cord gently and avoid tight bends, which can affect performance. Route the cord neatly with cable management, and keep it away from power cables where possible to reduce interference. Check that the connectors are fully seated and that the wiring standard is consistent throughout the installation.
Molex
Cat5e UTP LS0H patch cord, 568A/B wiring, 1 metre, blue
Article: PCD-01001-0H
Share this on your favourite channel: