





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat6 UTP patch cord, 1m, blue, LS0H sheath, 568A/B wiring
Part no. PCD-02001-0H
The Molex PATCH CORD C6 UTP LS0H 568A/B – 1M (Blue) is a ready-made Cat6 unshielded twisted pair (UTP) patch cord with a length of one metre and a blue LS0H sheath. It is part of the Molex Cat6 patch lead range, which is sold for structured cabling in offices, schools, clinics, data rooms and other buildings where a tidy network installation matters.
A patch cord is the short cable that links one piece of equipment to another within a network. In most installations, the fixed cabling runs inside walls and ceilings, and patch cords make the final connection at the patch panel, the wall outlet, the switch or the computer. This makes the patch cord one of the most handled parts of the network, so a consistent colour, clear length and well-finished ends help a great deal when staff need to trace or change a connection.
The TIA/EIA 568A and 568B wiring patterns define how the eight conductors are arranged at an RJ45 plug. Both patterns are in common use, and it is important that both ends of a link follow the same pattern, or the cord will not work correctly in the way you expect. A cord marked 568A/B is intended to fit the standard that your installation already uses, so check the wiring on the existing outlets and patch panels before you connect it.
LS0H stands for low smoke, zero halogen. This describes a jacket material that is designed to produce less smoke and no halogen gases when exposed to fire compared with standard PVC jackets. Many building owners and specifiers ask for LS0H cables in public or occupied buildings, and it is a common choice for patch leads that sit in comms rooms and ceiling spaces. Always follow your site’s cable and fire-safety requirements when choosing a jacket type.
A one-metre patch cord suits short links inside a rack or between a patch panel and a switch directly below it. Longer cords can be used for wider spaces, but excess cable should be avoided, as loops and coils make a cabinet hard to manage and can add clutter to cable trays. Colour is useful for quick identification. Blue is often used for data connections, though many sites choose their own colour scheme, and a mixed colour plan helps technicians tell apart different kinds of link at a glance.
Patch cords are easily damaged by careless handling, so treat them with care. Avoid sharp bends, do not pull the cord by the cable itself when unplugging it, and do not stand on or crush it under cabinets or cable trays. Keep a gentle bend radius and use cable management guides or velcro ties rather than tight plastic ties. Label each end of the cord with the port or destination it serves, so that future changes can be made without tracing the cable by hand.
This item suits installers, network technicians, IT managers and facilities staff who need a reliable Cat6 patch lead in blue. It is a practical choice for anyone building or tidying a structured cabling system and wanting a matching product from the same supplier as the rest of the network components.
If you are unsure which length, colour or wiring pattern you need for your installation, check the existing patch panel and outlet labelling, or ask a qualified network installer to confirm the layout before ordering.
Molex
Cat6 UTP patch cord, 1m, blue, LS0H sheath, 568A/B wiring
Part no. PCD-02001-0H
Share this on your favourite channel: