





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat6 UTP patch cord, 2m, red, LS0H sheath, 568A/B wiring
Connects network devices and patch panels

The Molex PATCH CORD C6 UTP LS0H 568A/B – 2M (Red) is a ready-made Category 6 patch lead for connecting equipment inside a structured cabling system. It is a short, pre-terminated cord that joins two points such as a patch panel port and a network switch, or a wall outlet and a computer.
Patch cords like this are one of the most frequently replaced parts of a network. Keeping them neat, correctly labelled and of the right length makes moves, adds and changes faster and reduces the chance of accidental disconnections in a rack or comms cupboard.
The 568A/B label refers to the two accepted pin-out standards for twisted pair Ethernet, T568A and T568B. A patch cord is only correct when both ends use the same standard, or when a deliberate crossover is required. Using the same standard across the whole installation avoids wiring faults that can be hard to trace later. Always confirm which standard your outlets and panels use before ordering or installing cords.
LS0H stands for low smoke, zero halogen. Cables with this jacket release less smoke when burning and do not release halogen gases, which can be corrosive and toxic. Many building specifications and client projects ask for LS0H cabling in ceilings, risers, plant rooms and public areas. The LS0H sheath makes this patch cord suitable for those environments, provided the wider installation meets the same requirements.
Leave a little slack in the cord so it is not pulled tight at either end. Avoid sharp bends near the connectors and keep patch leads separated from power cables where possible. Label each cord at both ends so that moves and fault finding are straightforward. Keep a record of which colour is used for which service, so the red cords in a cabinet always mean the same thing across the site.
This cord suits installers, IT technicians and facility managers who maintain Molex Cat6 structured cabling. It is equally useful for small offices and homes with a structured cabling outlet who need a short, tidy link. Because it is a 2-metre lead, it is best matched to short distances inside a cabinet or between nearby outlets rather than long runs across a building.
If you are not sure which length, colour or wiring standard your installation needs, check the existing cabling documentation or ask a qualified installer before buying. Matching the cord to the rest of the system is the simplest way to ensure reliable connections.
Molex
Cat6 UTP patch cord, 2m, red, LS0H sheath, 568A/B wiring
Connects network devices and patch panels
Share this on your favourite channel: