





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat6 UTP LSOH patch cord, 15 metres, grey
Wired to 568A/B, for structured cabling connections
The Molex PATCH CORD C6 UTP LSOH 568A/B 15M (Grey) is a 15-metre Category 6 unshielded twisted pair (UTP) patch lead. It belongs to the Molex Cat6 patch lead range, which is designed to connect equipment and outlets inside structured cabling systems. Whether you are fitting out a new office, upgrading a server room or tidying a comms cabinet, a patch lead of this kind forms the short connection between a switch or device and a wall outlet or patch panel port.
Structured cabling relies on a consistent set of components. Patch leads are the flexible links at each end of a permanent cable run, so they are the parts that are moved, replaced and added most often. Choosing a patch cord from the same manufacturer as the rest of the installation helps keep the connectivity components matched and the installation easy to maintain.
LSOH stands for low smoke, zero halogen. Cables with this type of sheath are chosen for buildings where people gather or where fire safety is a priority, such as offices, schools, hospitals and data centres. When the sheath burns, it produces comparatively little smoke and does not release halogen gases, which can be harmful to people and damaging to electronic equipment. An LSOH patch cord is therefore a practical choice in spaces where safety regulations or building owners call for lower-hazard cable materials.
The 568A and 568B schemes define how the eight conductors inside an RJ45 plug are arranged. Both are common, and both are accepted in Ethernet installations, provided that both ends of a cord follow the same scheme. Patch leads labelled 568A/B are therefore suitable for most standard connections. Confirm that your patch panels and outlets use the same scheme before installation, so that the links work as expected from the first day.
Patch cord length should be chosen with care. Cords that are too short can put strain on connectors and make cable management untidy, while cords that are too long create slack that must be stored. A 15-metre lead is intended for longer connections, such as linking a cabinet at one end of a room to a desk or device at the other, or reaching equipment that is not located directly beneath its outlet. Measure the route, allow for the vertical run and any cable tray or trunking, and then select the length that leaves a modest amount of slack without excess.
The grey colour of this patch lead is useful for grouping connections by function. Many installers assign colours to particular services, such as data, voice or uplinks, and then follow that scheme throughout a site. Using the Molex colour range in this way makes fault finding quicker and reduces the chance of unplugging the wrong lead during changes.
Handle patch leads gently and avoid sharp bends, particularly close to the connector. Route the lead through proper cable management, keep it separated from power cables where possible, and label both ends clearly. Check each link after installation with a suitable cable tester to confirm that the connection is wired correctly.
Keep a few spare leads of the same product code in stock. This allows fast replacement if a lead is damaged, and it avoids mixing components from different suppliers in the same installation.
Molex
Cat6 UTP LSOH patch cord, 15 metres, grey
Wired to 568A/B, for structured cabling connections
Share this on your favourite channel: