





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Molex SC/SC DPX OM3 patch lead is a 5 metre duplex fibre optic patch cable for structured cabling networks. It is built with SC connectors at both ends and 50/125µm OM3 multimode fibre, making it a practical choice for linking active equipment and passive fibre infrastructure within buildings and data centres.
Patch leads like this one form the final connection between a port on a switch, router or media converter and a fibre outlet, enclosure or panel. Using a pre-made, tested assembly reduces the need for on-site termination, which can save time on new installations and upgrades.
Multimode fibre carries light over a larger core than singlemode fibre, so it works well with the lower-cost optics used in local networks. OM3 is a laser-optimised multimode grade, which supports higher data rates over the distances typical of office and campus networks than older multimode grades. The 50/125µm core size is the standard used for this class of fibre.
This patch lead is most often used in the following settings:
Before ordering, confirm that the connectors on your equipment and panels are SC, and that the installed backbone is OM3 multimode. Using a patch lead with a different fibre grade or connector type can cause poor signal quality or prevent a link from coming up. For colour coding and labelling, check your site’s cabling standard so the lead matches the rest of the installation.
Fibre patch leads should be handled with care. Avoid sharp bends, which can damage the glass fibre, and keep the connector end caps on until the lead is connected. Route the cable through cable managers or trays to prevent strain on the connectors. Clean the ferrules before connection, as dust is a common cause of signal loss in fibre links.
For networks that already use OM3 multimode fibre and SC connectors, a ready-made 5 metre lead provides a quick and tidy way to complete a connection. It suits both new builds and maintenance work, and it can be combined with other Molex fibre components to build a consistent structured cabling system.