





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
SC/UPC single-mode jacketed pigtail
1m length, G657.a1 bend-insensitive fibre
White jacket, for splicing into fibre panels
The SC/UPC Jacketed Pigtail 1m G657.a1 White is a single-mode fibre pigtail for structured cabling installations. It has an SC connector with a UPC polish on one end and a bare, jacketed fibre tail on the other, ready to be spliced onto the fibre of a fibre optic cable. The assembly is one metre long and uses G657.a1 bend-insensitive fibre, finished with a white jacket.
In a typical installation, a fibre cable is run from one point to another and each fibre is terminated at a panel or enclosure. Pigtails make that termination practical. The fibre is spliced to the pigtail inside a splice tray or enclosure, and the SC connector is then mated to a patch panel adapter or a media converter port. Splicing is generally more reliable than field-polished connectors, and it gives a low-loss joint that is quick to make once the cable is prepared.
G657.a1 fibre is designed to keep signal loss low when it is bent more tightly than standard single-mode fibre allows. In cabinets, wall boxes and splice enclosures, fibre is often routed around corners and through narrow gaps. Bend-insensitive fibre makes that practical without degrading the link, which is useful in both new builds and retrofit work.
Keep the connector end clean and protected until it is mated. Dust or oil on a UPC ferrule can increase loss or cause reflections, so use the correct cleaning tools before connecting. Avoid sharp bends at the splice point, and leave enough slack in the enclosure to reduce strain on the splice. Installers should follow the fibre manufacturer and the relevant installation practice for the splicing method they use.
Choose this item when you need a single-mode SC/UPC pigtail in one metre length with a bend-insensitive G657.a1 fibre. It is listed as a promotional item, so stock is limited to what is on hand at the time of ordering. For mixed-length requirements, multimode connections or different connector types, check the other fibre component listings in the shop.
SC/UPC single-mode jacketed pigtail
1m length, G657.a1 bend-insensitive fibre
White jacket, for splicing into fibre panels
Share this on your favourite channel: