





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Siemon LC-LC duplex singlemode fibre patch lead is a 2 metre jumper cable for making fibre connections in data cabinets, comms rooms and network patch fields. It joins an LC connector at one end to an LC connector at the other end, with two fibres in a duplex pair. This arrangement is the standard way to connect the transmit and receive channels of a fibre link.
Patch leads like this are the short cables that make a structured cabling system work. The fixed cabling runs to a patch panel, and the patch lead then connects one port to another, or one piece of active equipment to the panel. Changing a patch lead is much quicker than re-terminating fibre, so a well-chosen set of leads keeps a network flexible as it changes.
Singlemode fibre carries light along a very narrow core, which allows signals to travel much further than multimode cable before they weaken. OS1/2 is the common specification for indoor and building backbone links using singlemode. LC connectors are small, push-pull connectors that take up less space than older styles, which is why they are common on modern switches, transceivers and patch panels with high port density.
Fibre patch leads should be handled with care. Keep dust caps on connectors until the lead is plugged in, and clean the connector end faces before connecting, using approved fibre cleaning tools. Do not bend the cable tighter than its minimum bend radius, and avoid pulling on the cable body. Route the lead through cable managers so it is not stressed when a rack door is closed or equipment is slid out for maintenance.
Because the lead is short, it is easy to route cleanly within one cabinet. Where the lead runs between cabinets, check that the length suits the route with enough slack to avoid strain without leaving excess loops that clutter the cable management.
Choose this patch lead when your equipment and panels use LC duplex singlemode connections and the 2 metre length matches your layout. The yellow jacket helps staff tell singlemode links apart from multimode links at a glance, which reduces the risk of mixing the two fibre types. The LSOH sheath suits indoor installations where low smoke and no halogen emissions are preferred.
If your connections need a different length, a different connector style, or a multimode fibre, check the specification before ordering so the lead fits your equipment.