





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N820X-10M is a 10 metre duplex fiber optic patch cable designed for high-speed data links. It uses 50/125 micron multimode OM3 fiber and is terminated with duplex LC-PC connectors at both ends. The supplier describes it as a 400G switchable multimode cable, suitable for use in modern network environments where bandwidth and clean, reliable connections matter.
Fiber optic cables like this one replace copper in many links where higher bandwidth, longer reach than copper, and immunity to electrical interference are needed. The duplex design uses two strands in one cable, one for transmitting and one for receiving, which keeps cable management simple at both ends of the link.
OM3 is a laser-optimised multimode fiber. It is widely installed in buildings, campuses and data centres because it supports high data rates over shorter distances at a lower cost than singlemode fiber. For a 10 metre link between nearby equipment, multimode is a practical and economical choice.
LC connectors are small form-factor connectors that are common on switches, transceivers, network interface cards and fiber patch panels. The PC polish is the standard finish for these connectors. Because both ends are duplex LC, the cable fits the transceiver and patch panel ports found in most current fiber installations.
The LSZH jacket is designed to produce low smoke and no halogen gases when it burns. This makes it a common choice for installations in enclosed spaces, plenum-type areas, public buildings and equipment rooms where fire safety and air quality are priorities. The aqua colour is used across many multimode cables to help distinguish them from singlemode or other fiber types in the same rack.
Before installing, confirm that the LC ports at both ends are multimode compatible and that the transceiver or switch supports the speed you intend to run. Keep the cable away from sharp bends and do not pull it harder than the manufacturer recommends. Clean the connector ends with an approved fiber cleaning tool before inserting them, as dust is a common cause of poor link performance. Label each end so that the cable can be traced easily when the network is changed later.
This 10 metre duplex multimode cable is a straightforward option for short fiber links in a network. Its LSZH sheath, clear aqua jacket, duplex LC connectors and lifetime limited warranty make it a dependable choice for offices, server rooms and data centres that need a ready-made patch cable of a fixed, practical length.



