





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite 40G MTP/MPO to 4xLC fan-out cable is a multimode fiber optic assembly that links a single MTP/MPO connector to four LC connectors. It is made for data centres, server rooms and network closets where a high-density 40 Gigabit connection has to be split into several standard LC links. The MTP/MPO end carries multiple fibers in one compact connector, and the four LC ends fit the duplex ports found on most switches, transceivers and patch panels.
A fan-out assembly is a practical way to connect parallel optics to conventional equipment. On one side, the MTP/MPO connector groups the fibers for a 40G optical interface. On the other side, the cable separates them into four LC duplex pairs. This lets a technician use one high-density port on a switch or module and connect the individual LC ports on other devices, patch panels or breakout points without the need for specialised cassettes.
OM4 is a multimode fiber grade that is commonly used for short-reach data links, including 40G and 100G parallel optics over distances within a building or campus. Choosing the correct fiber grade helps keep the link matched to the transceivers in use. Plenum rating is important where cables run through ceiling voids or ducts that carry air. Installers use plenum-rated cable in these spaces because building codes often require it for fire safety.
High-density fiber connectors can be difficult to remove from tightly packed ports. The push/pull tabs on this assembly give a firm grip, so the connector can be released without pulling on the fibers. Handle fiber connectors carefully, keep dust caps on unused ends, and clean the end faces before connecting, as contamination is a common cause of poor link performance.
Plan the route before cutting or dressing cable. Keep bend radius within the manufacturer’s guidance, avoid sharp kinks, and secure the cable with cable management so that the connectors are not strained. Label both ends clearly, especially where the four LC legs go to different devices. Because the MTP/MPO end is a multi-fiber connector, polarity and mating must be checked against the system design before the link is energised.
In short, this Tripp Lite cable is a focused solution for 40G-to-LC breakout on OM4 multimode fiber. It is suited to professionals who need a clean, plenum-rated assembly with easy-release connectors in a 3 metre length.



