





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
8-port unmanaged industrial Gigabit switch, PoE+ 30W, 2 GbE SFP slots
-40°C to 75°C, DIN rail mount
The Tripp Lite NGI-U08C2POE8 is an industrial-grade Ethernet switch designed to connect and power network devices in environments that are harsher than a typical office or server room. It combines eight Gigabit-capable copper ports, PoE+ power delivery and two SFP uplink slots in a single unit that mounts on a DIN rail inside a control panel or enclosure.
Industrial networks face conditions that office equipment is not built for: dust, vibration, wide temperature swings and limited access for maintenance. An industrial switch is intended to keep traffic flowing in those conditions, and this model is rated for operation from -40°C to 75°C, a range that covers both cold outdoor cabinets and hot machine enclosures.
An unmanaged switch does not require an administrator to set VLANs, port priorities or access rules. You connect the cables, apply power and the switch starts forwarding traffic. This makes it suitable for simple networks, for sites where IT support is remote, and for locations where a managed switch would be more than the application needs. If you need traffic segmentation or monitoring, a managed switch from the same range or another supplier would be the better choice.
PoE+ lets one cable carry both data and power. This is useful for IP cameras mounted on poles or walls, wireless access points on ceilings, and sensors or controllers that are far from a power outlet. Running a single cable to each device reduces installation time and removes the cost of electrical work at each point. Check the power draw of each connected device against the 30W rating before you plan the layout, so that no port is overloaded.
The two SFP slots allow the switch to connect to the rest of the network over fibre, which covers longer distances and reduces electrical interference compared with copper. Copper SFP modules can also be used where a fibre run is not practical. Use the uplinks to link this switch to a core switch, a router or another distribution point, and keep the eight copper ports for end devices.
This switch suits factory floors and production lines, where machines and sensors need reliable connections. It is also used in traffic management and transport systems, utility and water installations, building automation, and outdoor surveillance networks. In each case, the wide temperature range and DIN rail mounting make it easier to fit into existing panels.
It can also serve as a remote-site switch where a small number of devices need network access and power, such as a gate controller, a camera and a wireless bridge at the same location.
The NGI-U08C2POE8 carries a 3-year limited warranty. Read the warranty terms supplied with the product for details of what is covered and how claims are handled. Keep your proof of purchase with the equipment records for the site.
Choosing the right switch comes down to the number of devices, the total power they need, the distance to the next network point and the conditions in the installation area. If you are unsure whether this model fits your application, check your device power requirements and environmental conditions before ordering.
Tripp Lite
8-port unmanaged industrial Gigabit switch, PoE+ 30W, 2 GbE SFP slots
-40°C to 75°C, DIN rail mount
Share this on your favourite channel: