





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
Cat6 Gigabit molded slim UTP patch cable, RJ45 left-angle to RJ45
Blue, 7 ft (2.13 m)
The Tripp Lite N204-S07-BL-LA is a Cat6 Ethernet patch cable designed for the everyday job of connecting network equipment. Its left-angle RJ45 connector makes it a good fit where a straight plug would be awkward, such as behind a wall-mounted device, at the back of a tight desk, or inside a cabinet with limited clearance. The other end is a standard RJ45 male connector, so the lead works with the common ports found on switches, routers, computers, wall outlets and patch panels.
Cat6 cable is a common choice for Gigabit Ethernet networks. This lead is described as a Cat6 Gigabit molded slim UTP cable, meaning it uses unshielded twisted pairs of copper conductors inside a molded, slim jacket. The molded connectors give the lead a finished, solid feel and help protect the point where the wire meets the plug. The slim profile helps it bend and route more easily through cable trays, trunking and the gaps behind furniture.
This cable is well suited to short network links. In an office, it can connect a desktop computer or docking point to a wall outlet. In a home office, it can link a router, games console, smart TV or network printer to a nearby switch. In a small server or comms cupboard, it can join a patch panel to a switch or router when the ports are close together and a straight connector would bend sharply against the panel or side of the rack.
The left-angle head is particularly useful when the equipment is pushed against a wall or sits in a cabinet with other cables close by. It reduces the stress on the port and keeps the lead lying flatter, which makes the setup look neater. The 7 ft length gives enough reach for most desks and short runs without leaving a long coil of spare cable to store.
In network installations, identifying cables quickly saves time during troubleshooting and maintenance. The blue jacket can be used as part of a colour scheme, for example to separate data links from other cabling. The 7 ft length is a practical middle ground: long enough to reach across most rooms and cabinets, yet short enough to keep the layout tidy.
Before connecting, check that the port on each device is the right type for an RJ45 connector and that the cable is not bent sharply near the connectors. Route the lead so it is not pinched under furniture or against sharp edges. Where several cables run together, use cable ties loosely so the jackets are not crushed. Leave a small loop of slack rather than pulling the cable tight between two fixed points.
This product is a copper network cable listed in the Cat6 cables range. The supplied information gives the description, colour, length and connector type. For details beyond these, check the product packaging or the manufacturer’s documentation before ordering a specific installation.
Tripp Lite
Cat6 Gigabit molded slim UTP patch cable, RJ45 left-angle to RJ45
Blue, 7 ft (2.13 m)
Share this on your favourite channel:



