





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
Cat6a 10G shielded STP patch cable, RJ45 to RJ45, PoE, blue
Length: 5 ft (1.52 m)
The Tripp Lite N262-005-BL is a short Cat6a patch cable designed for structured networks that need 10 Gigabit speeds and Power over Ethernet. It connects two RJ45 ports and is sized at 5 feet (1.52 metres), a practical length for connections inside a rack, under a desk or between nearby equipment.
Cat6a is a high-performance copper cabling standard. Compared with older Cat5e and Cat6 cables, it supports 10 Gigabit Ethernet over full channel lengths and has tighter limits on crosstalk, which is why it is often chosen for newer office, school and data room installations.
This cable is commonly used to link a computer, phone or access point to a wall port or patch panel. It also suits connecting a network switch to a patch panel in a cabinet, and powering a PoE device such as an IP camera, VoIP phone or wireless access point from a PoE-capable switch.
Because the blue colour and short length are easy to spot, the cable is useful where many leads are installed close together. Installers can use colour coding to separate data, voice and camera circuits. Keeping leads short also helps reduce clutter and makes cable management in a rack more orderly.
Cat6a is a good choice when the network is expected to run at 10 Gigabit speeds now or in the future, or when PoE devices draw significant power. For basic home or small office connections at lower speeds, Cat5e or Cat6 may also be suitable. Always check that the device ports and any patch panels support the cable category you select.
Avoid bending the cable sharply or pulling it hard by the cable body. Use the connector boot to plug and unplug the lead. Leave some slack in the cable run when mounting it in a rack so that equipment can be moved without straining the connectors.
Tripp Lite
Cat6a 10G shielded STP patch cable, RJ45 to RJ45, PoE, blue
Length: 5 ft (1.52 m)
Share this on your favourite channel:



