





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
Duplex singlemode 9/125 fiber patch cable, LC to SC connectors, 1 metre (3 ft.)
Lifetime limited warranty
The Tripp Lite N366-01M is a 1 metre (3 ft.) duplex singlemode fiber patch cable with an LC connector on one end and an SC connector on the other. It is built for short fiber links where singlemode performance is required and where equipment on each side uses a different connector type.
Singlemode fiber carries a single light path through a very small 9 micron core, which allows signals to travel much further than multimode fiber. Using a 9/125 fiber specification, this patch cable is intended for singlemode networks rather than multimode ones, so it should be matched to singlemode transceivers and ports.
LC connectors are small, push-pull style plugs that are common on modern switches, transceivers and fiber optic modules. SC connectors are larger, push-pull plugs widely used on older equipment and on many patch panels and media converters. A mixed LC to SC patch cable lets these two worlds connect without adapters, reducing the number of connection points in the link.
This cable is suited to a range of short fiber connections, including:
Keep fiber patch leads free of sharp bends and avoid tight pulling forces. Clean connector end faces before mating them, since dust is a common cause of signal loss on fiber links. Check that both ends of the link are singlemode before installing, because mixing singlemode and multimode equipment can cause failed connections.
The N366-01M is listed as a short, one-metre option. If you need a different length or a different connector combination, check the Tripp Lite range for the matching part number before ordering.
Tripp Lite
Duplex singlemode 9/125 fiber patch cable, LC to SC connectors, 1 metre (3 ft.)
Lifetime limited warranty
Share this on your favourite channel:



