





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite N366-05M
Duplex singlemode 9/125 fiber patch cable, LC to SC, 5 m (16 ft.)
Lifetime limited warranty
The Tripp Lite N366-05M is a 5-metre (16 ft.) duplex singlemode fiber patch cable that joins an LC connector to an SC connector. It is designed for structured cabling and equipment connections where a singlemode fiber link is needed between two different connector styles.
Singlemode fiber has a very small core, which lets a single light path travel with little dispersion. That makes it the usual choice for longer runs, backbone links and connections between buildings or floors, compared with multimode fiber, which suits shorter distances. The 9/125 designation refers to the core diameter of 9 microns and the cladding diameter of 125 microns, the standard for singlemode fiber.
This patch cable is used to link network switches, routers, servers and media converters that have LC ports to equipment with SC ports. Common applications include connecting a rack-mounted switch to a patch panel, linking a fiber transceiver to a distribution frame, or bridging two equipment racks in the same room. The 5-metre length suits short to medium runs inside a server room, data cabinet or comms closet, where the equipment is close together but not directly adjacent.
A duplex cable carries a transmit fiber and a receive fiber in one jacket. Each end is keyed so the transmit side of one device lines up with the receive side of the other. This keeps cable management simple, since one cable provides the full bidirectional link that would otherwise need two separate patch leads.
LC connectors are small, push-pull connectors common on modern transceivers and switches. SC connectors are larger, snap-in connectors that remain widely used on older equipment and on many fiber panels. Using a cable with one of each lets you connect hardware that does not share the same connector standard, without adding a separate adapter.
Keep fiber ends clean and covered until they are connected, since dust on a connector end face can degrade the signal. Avoid tight bends, which can damage the fiber, and route the cable so it is not pinched or stressed at the connectors. Confirm that the connector types and polarity match your equipment before installing.
Tripp Lite provides a lifetime limited warranty on this product. Check the warranty terms supplied by the manufacturer for the exact conditions that apply.
Tripp Lite N366-05M
Duplex singlemode 9/125 fiber patch cable, LC to SC, 5 m (16 ft.)
Lifetime limited warranty
Share this on your favourite channel:



