





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N785-INT-LC-MM is a Gigabit media converter designed to bridge copper Ethernet and multimode fibre optic networks. It allows a device with a standard RJ45 Ethernet port to join a fibre network, or allows a copper network to reach equipment that sits far beyond the normal copper cable distance. Using a converter like this avoids replacing existing network equipment when fibre is introduced into a site.
Fibre optic cabling carries data as pulses of light rather than electrical signals. This brings several advantages over copper: it can cover much longer distances, it is not affected by electromagnetic interference, and it does not carry electrical current, which reduces the risk of ground loops and surges passing between buildings. The N785-INT-LC-MM handles the conversion between these two media in a compact unit.
Multimode fibre uses a wider core than singlemode fibre and is well suited to shorter and medium runs inside buildings and between nearby buildings on a campus. A multimode converter at 850 nm is the right match for that type of cabling. If your existing fibre is singlemode, a different model is required, so confirm the fibre type before ordering.
Before installing, confirm that the fibre link is multimode and that the LC connectors on the patch leads are compatible with the converter. Connect the copper port to the switch or device using a standard Ethernet patch cable, connect the fibre pair to the matching LC ports at each end, and power up the unit. Keep the fibre run within the 550-metre specification, and avoid sharp bends in the cable, as these can increase signal loss.
This converter suits network installers, IT departments and system integrators who need to add a fibre link to an existing copper network. It is also useful for facilities managers who need to connect equipment in separate buildings without installing new copper cabling.
For a complete link, you will need a matching multimode fibre pair at the far end, typically with a second media converter or a fibre-capable device at the other site. Ask your supplier about compatible patch leads and accessories if you are building a new fibre run.