





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N820X-05M is a 5 metre duplex fiber optic cable for connecting network equipment over multimode fiber. It is part of Tripp Lite’s fiber active optical range from Eaton and is listed as a 400G switchable multimode cable, making it suitable for high-bandwidth links in data rooms, server racks and campus network cabinets.
Multimode fiber carries light over shorter distances than singlemode, which makes it a practical choice for links inside a building or between nearby cabinets. This cable uses 50/125 micron OM3 fiber, the standard grade for multimode runs at high speed over short reaches.
OM3 fiber is widely used in data centres and enterprise networks because it supports high data rates over short distances at a reasonable cost. The LSZH jacket releases little smoke and no halogen gases when exposed to heat or fire, which is why it is often specified for cables installed in ceilings, risers and enclosed equipment spaces. The aqua colour follows the common convention for multimode fiber, so the cable is easy to tell apart from singlemode yellow cables in a patch field.
LC connectors are small, push-pull style connectors that allow high port density on switches and patch panels. The PC (physical contact) polish is the standard finish for most multimode links. Both ends of this cable are duplex LC, so each cable carries two fibers, one for transmit and one for receive.
Confirm that your switches, transceivers or network cards have LC ports and support multimode fiber at the speed you plan to run. Because the cable is 5 metres long, it is best suited to short patch runs within a rack or between neighbouring cabinets. For longer distances, a singlemode cable or a different fiber grade may be more suitable.
Fiber cables should be handled with care. Avoid sharp bends, keep dust caps on unused connectors, and clean the connector ends before inserting them into ports. A clean, well-routed cable helps maintain signal quality and reduces troubleshooting time later.