





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N845B-15M-12-MG is a 15 metre fibre optic cable designed for 100G multimode networks. It combines twelve 50/125 OM4 fibres in a single MTP/MPO-PC connector at each end, giving a compact, high-density link between two points in a data network. The cable is female-to-female, the LSZH jacket is magenta, and the overall length is 15 m (49.2 ft).
Modern networks increasingly rely on parallel optics, where one high-speed channel is carried across several fibres. A 12-fibre MTP/MPO connector is the standard way to present those fibres in a single plug, and this cable provides that connection in a factory-terminated, ready-to-use length. It is part of Tripp Lite’s connectivity range, which is supplied by Eaton.
OM4 is a multimode fibre grade designed for higher bandwidth over short and medium distances than older OM1, OM2 or OM3 fibre. Used with MTP/MPO connectors, it supports the parallel transmission needed for 100G links. The 12-fibre count fits common 100G parallel optic formats, but the connector gender and polarity must still match the ports at each end of the link.
The PC (physical contact) polish on the connectors helps reduce back reflection at the mating surface, which is useful when many fibres are mated together. Keep the end faces clean and protected with dust caps when the cable is disconnected, since contamination is the most common cause of link problems with MTP/MPO connectors.
The LSZH jacket is designed to produce little smoke and no halogen gases when burned. This makes it a common choice for cabling inside buildings, particularly in enclosed spaces, plenum-style areas, data centres and public buildings where fire safety rules apply. Check your local building and installation requirements before choosing a jacket type for a specific site.
This cable suits several common scenarios in a structured network:
Before installing, confirm the port type and gender on your switches and patch panels, and check that the polarity method used across the link is correct. Route the cable without sharp bends, and avoid pulling on the connector body. Use a proper MTP/MPO inspection scope and a cleaning kit before each mating. Label both ends so the cable can be traced later in a crowded cabinet.
The item is covered by a lifetime limited warranty, as listed for this product. Tripp Lite products in this range are ordered in on request, so confirm availability, minimum order quantity and delivery with your sales representative before placing an order. If you are unsure whether the fibre count, connector type or polarity matches your equipment, ask for technical advice before purchase to avoid returns.



