Lenovo South Africa Channel Awards 2
Lenovo South Africa Channel Awards
Congratulations to our Server Team. Distributor of The Year!
ThinkSystem Tower Servers
Modernize to boost your business with Windows Server 2022.
Think Big. Think Lenovo. ThinkSystem Tower Servers.
Lenovo F1

INFRASTRUCTURE TEAM

+27 (0) 11 237 1000

INFRASTRUCTURE TEAM

Tripp Lite
NPOEI-60W-1G

Tripp Lite
Industrial Gigabit PoE++ Injector, 60W, 802.3bt, 1 Port
-40℃ to +75℃, IP30, DIN rail, Dual 24-57VDC

SKU NPOEI-60W-1G Category Brand:
Share

Tripp Lite NPOEI-60W-1G Industrial Gigabit PoE++ Injector for Remote Powered Devices

The Tripp Lite NPOEI-60W-1G is an industrial Gigabit Ethernet PoE++ injector designed to supply power and data to network devices that are placed away from a power outlet. Using the 802.3bt standard, it provides up to 60W over a single Ethernet connection. The unit operates as a midspan injector, which means it is installed between an existing network switch and the powered device. The switch passes data through as normal, while the injector adds the power to the same cable.

Many installations need network devices in places where running a separate mains cable is costly, slow or impractical. A PoE injector solves this by carrying power on the Ethernet cable itself. The NPOEI-60W-1G is built for these situations, with an industrial rating, a DIN rail mount and dual DC input, so it fits into control panels and equipment enclosures alongside other industrial hardware.

Key Features

  • Industrial Gigabit Ethernet PoE injector
  • 60W PoE++ output
  • 802.3bt standard
  • Midspan installation between switch and powered device
  • Single port
  • Operating temperature range -40℃ to +75℃
  • IP30 housing
  • Dual 24-57VDC power input
  • DIN rail mounting

Specifications Overview

  • Product type: PoE++ injector (midspan)
  • Standard: 802.3bt
  • Power output: 60W
  • Ports: 1
  • Network speed: Gigabit Ethernet
  • Operating temperature: -40℃ to +75℃
  • Housing: IP30
  • Power input: Dual 24-57VDC
  • Mounting: DIN rail
  • Warranty: 3-year limited warranty

Installation and Setup

Mount the injector on a DIN rail inside a suitable enclosure or control cabinet. Connect the DC supply to the power input terminals, using the dual input if a redundant or alternative DC source is available. Run the Ethernet cable from the network switch into the data input side of the injector, then connect the output side to the powered device. Because the injector is a midspan unit, the powered device must support the PoE standard the injector provides. Confirm the device’s power requirements before installation so the 60W output is sufficient.

Typical Uses

The NPOEI-60W-1G suits a wide range of industrial and outdoor-adjacent applications where equipment must be powered over a network cable and operate in varying temperatures.

  • Industrial automation cells and factory floor equipment
  • IP cameras and sensors in enclosed or semi-protected locations
  • Wireless access points and network endpoints at remote points
  • Traffic, transport and infrastructure monitoring devices
  • Control panels that need a single powered network drop

Why Choose This Injector

The combination of a wide temperature range, a DIN rail form factor and DC input makes this injector a practical choice for technicians and integrators who work with industrial equipment. It removes the need for separate power cabling to each device, which can reduce installation time and simplify maintenance. Because it is a single-port unit, it is also easy to plan into a design where each remote device has its own dedicated feed.

Before You Buy

Check that the powered device supports 802.3bt or the PoE class it requires, that the DC supply falls within the 24-57VDC range, and that the installation site suits an IP30 housing. If you are unsure whether this injector matches your device or site conditions, contact us before ordering so we can help you confirm compatibility.

SKU NPOEI-60W-1G Category Brand:

Tripp Lite
NPOEI-60W-1G

Tripp Lite
Industrial Gigabit PoE++ Injector, 60W, 802.3bt, 1 Port
-40℃ to +75℃, IP30, DIN rail, Dual 24-57VDC

Share this on your favourite channel:

Sign Up & Register

Mustek’s Infrastructure Technology Team are one of the largest suppliers of infrastructure technology in the country and on the continent. Register to become a reseller. Already a reseller?

Sign up for the latest pricelists, specials and offers.

Are you registered as a reseller?*
Area of interest?*

UPS Q&A

Keep up to date with the latest product developments from our divisions and outstanding solutions that will inspire you.

UPS Configuration Questionnaire

Ready to talk