





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
PDU power cord, C13 to Schuko (CEE 7/7), 10A 250V, H05VV-F, 2 metres, black
The Tripp Lite P054-02M-EU is a two-metre power cord with a C13 connector at one end and a Schuko (CEE 7/7) plug at the other. It is designed to carry power from a power distribution unit or other C13 outlet to a standard European-style wall socket. Because the cord is part of the Tripp Lite range, it is a convenient match for rack power setups that use Tripp Lite and Eaton products.
Power cords like this one are easy to overlook, but they matter. A cord that is the right length, the right rating and the right plug type keeps equipment connected safely and makes cable routing tidy. This model gives you a fixed two-metre run with the connectors already attached, so you do not need to cut or terminate cable on site.
The H05VV-F cable is a flexible, PVC-insulated cable suited to light-duty mains connections. Its flexibility makes it easier to route around rack rails, cable managers and equipment at the back of cabinets. The black outer jacket blends in with most data centre and office equipment, which keeps installations looking uniform.
The C13 end fits the common IEC outlet found on PDUs, UPS units and many desktop and server power supplies. The Schuko end fits standard CEE 7/7 sockets used across much of Europe and in other regions that follow the same system. The 10A, 250V rating is stated on the product and should be checked against the load of the equipment you connect.
The price list row for this product shows a lifetime limited warranty. Please check the warranty terms supplied with the product or confirm them with your sales representative before relying on them.
Before ordering, confirm that your equipment has a C13 inlet and that your wall socket is a Schuko (CEE 7/7) type. Check that the current rating of the cord meets or exceeds the requirements of the connected device. Two metres is a common length for connecting a device at the back of a rack to a nearby PDU or wall outlet, but measure the route first to make sure the cord reaches without strain.
Keep the cord free from sharp bends and do not run it under heavy objects. Route it away from moving parts and heat sources. Inspect the connectors and jacket regularly, and replace the cord if the insulation is damaged.
Tripp Lite
PDU power cord, C13 to Schuko (CEE 7/7), 10A 250V, H05VV-F, 2 metres, black
Share this on your favourite channel: