





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
DisplayPort 1.2 to VGA active adapter cable, DP with latches to HD15 M/M
10 ft. (3.1 m), 3-year limited warranty
Many modern computers and graphics cards ship with DisplayPort outputs but no VGA port, while many projectors, boardroom screens and older monitors still accept only VGA. The Tripp Lite P581-010-VGA-V2 bridges that gap with a single cable that carries the video signal from a DisplayPort 1.2 source to a VGA display.
This is an active adapter cable, meaning electronics inside the cable handle the conversion from the digital DisplayPort signal to the analogue VGA signal. A passive cable could not do this, so the adapter removes the need for a separate converter box and its extra power supply and cabling.
The cable is built with a DisplayPort male connector that has latches, which help keep the plug secure in the port during use. The other end is an HD15 male connector, the standard 15-pin VGA plug. The cable length is 10 ft. (3.1 m).
The cable suits a wide range of practical situations where a DisplayPort source must drive a VGA display:
Check that your source device has a DisplayPort output and that the display has a VGA input before ordering. The 10 ft. length gives comfortable reach for most desks and presentation layouts, but measure the distance between the source and the display first. If you need a different length or a different connection, the Tripp Lite range includes other DisplayPort and VGA cables.
For a clear picture, keep the cable run as short as the layout allows and avoid running it tightly alongside power cables. Plug the cable in firmly, using the latches on the DisplayPort end, and then switch on the display and source.
Tripp Lite
DisplayPort 1.2 to VGA active adapter cable, DP with latches to HD15 M/M
10 ft. (3.1 m), 3-year limited warranty
Share this on your favourite channel: