





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite U328F-30M is a USB 3.2 Gen 1 fibre active optical cable designed to extend USB connections well beyond the limits of standard copper USB cables. Where a conventional USB cable is generally restricted to a few metres, this 30 metre AOC lets you place a USB device far from its host while keeping the familiar USB-A and USB-B interface.
Active optical cables convert the electrical USB signal into light at one end and back into an electrical signal at the other. This conversion is what allows the long run. The fibre core carries the data, so the cable is not susceptible to electromagnetic interference, and it does not need a separate power supply for the optical path.
This cable suits situations where a USB device must sit a long distance from its computer. Common examples include connecting a camera or scanner in a large hall, linking a hub or peripheral on another floor, or running USB through a ceiling void or riser where plenum-rated cabling is required. It is also useful in control rooms, labs, and installations where electrical noise makes copper runs unreliable.
Plan the route before connecting. Keep the cable away from sharp bends and do not pull on the cable body when routing it through trunking or ducts. Connect the host end first, then the device end, and make sure the USB-A and USB-B connectors are fully seated. Because the cable is a fixed-length assembly, measure the path carefully and allow some slack without forming tight loops.
As a USB 3.2 Gen 1 cable it works with USB ports and devices that follow the USB standard. Check that the host port and the device are both USB-A and USB-B compatible at the speed you need. If you require a different length, a different connector configuration, or a different data rate, compare the other Tripp Lite USB and fibre options before ordering.



