





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Hikvision HK-SFP-1.25G-20-1310-DF is a small form-factor pluggable (SFP) optical transceiver for single mode fiber links. It runs at 1.25 Gbps and uses a 1310 nm wavelength for both transmit (TX) and receive (RX). The module has an LC duplex connector and is rated for a distance of 20 km.
An SFP module slots into a matching SFP port on a network switch, router or other networking device. It converts the electrical signals from the device into light pulses for transmission over fiber, and back again at the far end. Because the module is pluggable, it can be fitted, removed or replaced without changing the equipment it sits in, which makes it a flexible way to add fiber connectivity.
Single mode fiber is used where longer distances are needed. A 20 km rating makes this module suitable for linking buildings on a campus, connecting remote sites, or carrying network traffic between equipment rooms that are far apart. Where copper cable would be too long or unsuitable because of electrical interference, fiber provides a practical alternative.
The specified operating temperature range is 0 to 70°C, so the module is intended for use within that range. Check the fitted device’s own specifications to confirm that it has a compatible SFP port and speed before installing.
This module is a good choice for installers and network administrators who need a dependable single mode fiber link at 1.25G over a medium to long distance, with a simple duplex LC connection.

The Hikvision HK-SFP-1.25G-20-1310-DF is a single mode SFP optical transceiver designed to extend network connections over fiber optic cable. Operating at 1.25 Gbps, it transmits and receives on a 1310 nm wavelength and offers a reach of up to 20 km. It is a practical option for networks that have outgrown the distance limits of copper cabling and need a reliable fiber uplink between devices.
SFP, short for small form-factor pluggable, describes a compact, hot-swappable module standard. The module plugs into a matching SFP cage on a switch, router or media device. Once fitted, it converts electrical signals into optical signals and back again, so the host equipment can communicate over a long fiber run without any change to the rest of the network design.
Single mode fiber has a very small core, which allows light to travel in a single path. This reduces signal dispersion over distance and is the reason single mode is chosen for links of several kilometres. A 20 km module is therefore well suited to campus backbones, links between separate buildings, outdoor sites and other runs where multimode fiber would not reach.
Using the same wavelength on both TX and RX simplifies the link planning, as both ends of the connection are specified the same way. The duplex LC connector is compact and widely used, which keeps patch cords and fiber panels easy to source and manage.
Before ordering, confirm that the host device has an SFP port that supports a 1.25G single mode module with a 1310 nm wavelength. Clean the LC connectors before insertion and use single mode patch cords and fiber panels that match the link. Keep the module within its 0 to 70°C operating range, and make sure the fiber route and both ends of the link are documented so that future troubleshooting is straightforward.
This module suits system integrators, network installers and IT teams who need a dependable single mode fiber connection over a long distance at 1.25G. It is also useful for maintenance work where a failed or missing SFP module needs to be replaced with a like-for-like part.
The Hikvision HK-SFP-1.25G-20-1310-DF is a small form-factor pluggable (SFP) optical transceiver for single mode fiber links. It runs at 1.25 Gbps and uses a 1310 nm wavelength for both transmit (TX) and receive (RX). The module has an LC duplex connector and is rated for a distance of 20 km.
An SFP module slots into a matching SFP port on a network switch, router or other networking device. It converts the electrical signals from the device into light pulses for transmission over fiber, and back again at the far end. Because the module is pluggable, it can be fitted, removed or replaced without changing the equipment it sits in, which makes it a flexible way to add fiber connectivity.
Single mode fiber is used where longer distances are needed. A 20 km rating makes this module suitable for linking buildings on a campus, connecting remote sites, or carrying network traffic between equipment rooms that are far apart. Where copper cable would be too long or unsuitable because of electrical interference, fiber provides a practical alternative.
The specified operating temperature range is 0 to 70°C, so the module is intended for use within that range. Check the fitted device’s own specifications to confirm that it has a compatible SFP port and speed before installing.
This module is a good choice for installers and network administrators who need a dependable single mode fiber link at 1.25G over a medium to long distance, with a simple duplex LC connection.
Share this on your favourite channel: