





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
Outdoor 5GHz wireless bridge CPE kit, 5km range, 867Mbps
9dBi gain, 22dBm output, 2 x 10/100 RJ45 ports, PoE in and out

The Hikvision DS-3WF02-5AC/D is an outdoor 5GHz wireless bridge kit that uses customer premises equipment (CPE) to create a point-to-point or point-to-multipoint wireless link. Where digging trenches for cable is expensive, slow or simply not allowed, a link like this can connect two locations across open ground, a road or a yard. The kit is rated for a maximum distance of 5km, and its outdoor housing is intended to be mounted and left in place year-round.
Wireless bridges are often the first choice when a remote building, gate, car park or camera pole needs to be reached from the main network. Instead of running fibre or armoured cable, the installer mounts one unit at each end, aims them at each other and connects each one to the local network. The result behaves much like a network cable, carrying data between the two sites.
The MIMO antenna design uses two transmit and two receive paths. This allows the unit to send and receive multiple data streams at the same time, which is how the supplier arrives at its rating of up to 867Mbps. Actual throughput over a real link depends on distance, obstacles, interference, weather and the performance of the equipment at the other end, so the rated figure should be treated as a maximum rather than a guaranteed speed.
The 9dBi antenna gain focuses radio energy into a narrower area, which helps the link reach further. The 35° horizontal angle means the antenna must be pointed fairly precisely toward the other unit. Careful alignment during installation is therefore important, and most installers check signal strength while adjusting the mounting before final fixing.
The two RJ45 ports are rated 10/100 Mbps, which is suitable for connecting cameras, controllers, access points and office devices where moderate bandwidth is needed. Support for standard PoE input and output means the unit can be powered from a PoE source, and can pass power onward to another PoE device. This reduces the number of separate power supplies needed at a remote site.
One of the most common uses is linking an outbuilding, warehouse or workshop to a main office network. A single Ethernet connection at each end provides shared internet access, file sharing and telephone or printer connectivity without underground cable.
The kit is also suited to CCTV installations. Cameras mounted at a distant gate, boundary or car park can be connected back to a recorder at the main building. Because the unit supports PoE, a camera on the far side can often be powered directly from the bridge.
Access control and intercom points at remote entrances can be connected in the same way. Estates, farms, schools, sports grounds and industrial sites frequently use wireless bridges to reach outlying buildings that would otherwise require costly civil work.
Before installing, confirm that a clear line of sight exists between the two sites, as obstacles such as trees, buildings and metal structures reduce signal quality. Mount each unit securely and at a height that avoids obstructions. Use weatherproof cable connections and follow the supplier’s guidance on grounding and surge protection for outdoor equipment.
Plan the PoE arrangement in advance. Confirm the power source at each end and make sure the cable run is within the normal limits for Ethernet. After installation, test the link under real traffic conditions to confirm that performance meets the requirements of the cameras or devices using it.
This kit is supplied as a bridge pair for a point-to-point link. Check the included items and the supplier documentation before ordering additional units or accessories for a larger network.
Hikvision
Outdoor 5GHz wireless bridge CPE kit, 5km range, 867Mbps
9dBi gain, 22dBm output, 2 x 10/100 RJ45 ports, PoE in and out
Share this on your favourite channel: