





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
16-channel 12V CCTV power supply, 1A per channel, 120W total
European standard

The Hikvision DS-2FA1208-C16 is a 12V distributed power supply designed for analogue CCTV systems. Its sixteen outputs make it a convenient way to power a larger group of cameras from one central unit, rather than using a separate adaptor for each camera. Each channel provides 12V at 1A, and the unit is rated at 120W in total.
Analogue surveillance systems often grow over time. A camera is added to the entrance, another to the loading bay, and a few more to the car park. A central power supply like this one helps keep the installation organised, reduces the number of loose adaptors around the site, and makes it easier to find and service a fault when it happens.
This model is part of the Hikvision Analogue range, which covers DVRs, turret, dome, bullet and PTZ cameras, monitors, coax cable, connectors and other accessories. The DS-2FA1208-C16 belongs in the accessories group and is meant to be used alongside those products. It is described as a European standard model.
Before installing, check the rated power draw of every camera you intend to connect. Each channel is limited to 1A, so a camera drawing more than that on its own will not be suitable for that output. Also add up the combined load of all cameras so the total stays within the 120W rating. Leaving some spare capacity is sensible, because it gives room for future additions and reduces strain on the unit.
Mount the power supply somewhere dry, ventilated and reasonably accessible, such as in a cabinet or equipment room near the cameras and the recorder. Keep the cable runs as short and neat as practical, and label each output so the matching camera can be identified quickly. Confirm that the plug and supply type match your local mains outlets, since the unit is listed as a European standard model. Follow the instructions supplied with the product and have the work carried out by a suitably qualified installer where needed.
A central 12V supply can simplify a CCTV installation considerably. Fewer individual adaptors means fewer points of failure scattered across a site, and a single location to check when a camera stops working. It also helps with neatness, since the cabling can be routed back to one place rather than to many plug points on walls and ceilings. For a business that depends on continuous monitoring, a well-organised power arrangement is part of keeping the system reliable.
The DS-2FA1208-C16 is a sensible choice for anyone building or expanding an analogue CCTV system with Hikvision equipment. Check your camera power requirements, plan the layout, and the sixteen channels can serve a useful range of monitoring points.
Hikvision
16-channel 12V CCTV power supply, 1A per channel, 120W total
European standard
Share this on your favourite channel: