





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
BNC crimp connector, male, 6mm
For terminating coaxial cable on analogue (TVI) CCTV systems
The Hikvision BNC Crimp Connector Male 6mm is a male BNC plug for terminating coaxial video cable in analogue (TVI) CCTV systems. BNC is the connector style most commonly used to carry video signals between cameras, cabling and recorders, and this crimp version lets an installer finish a cable end on site without soldering.
In a typical analogue CCTV installation, a camera or a patch point connects to the recorder through a length of coax cable. Each end of that cable needs a connector. Where cable is cut to length, moved or repaired, a new BNC plug is fitted. The male connector has a centre pin and a threaded or bayonet-style outer body that mates with a female BNC socket on the device or on a patch panel.
This item is part of the Hikvision analogue accessories range. It is described in the supplier price list as a BNC crimp connector, male, 6mm. The 6mm reference is taken from the product description and should be read as the connector designation given by the supplier.
A crimp connector is fitted in a few steps. The cable jacket is stripped to the length the connector requires, the braided shield is folded back over the jacket, and the centre conductor is trimmed to the correct length. The connector body is slid into position and crimped with a proper crimping tool so the grip on the cable is firm. A poorly crimped connector can cause intermittent picture loss, so the crimp should be checked by pulling gently on the joint and by testing the picture on the recorder once the cable is connected.
BNC connectors are sized to suit a specific cable type. Make sure this connector is the right fit for the coaxial cable in use, and that the cable is suitable for the length and environment of the run. Using the wrong cable or a poorly matched connector can reduce picture quality. The supplier description does not list the cable types it is designed for, so confirm this before installation.
Plan the cable route before cutting, and leave enough slack for maintenance. Keep video cable away from mains power cables to reduce interference. Once the connector is fitted, check the image on a monitor or recorder and look for noise, rolling bars or a weak picture, which can point to a poor crimp or a damaged cable. Keep spare connectors and the correct crimping tool on hand for future repairs.
This connector is aimed at installers, technicians and system owners who work with analogue CCTV. It is a practical part for anyone who needs to finish a coax cable end without specialist soldering equipment.
Hikvision
BNC crimp connector, male, 6mm
For terminating coaxial cable on analogue (TVI) CCTV systems
Share this on your favourite channel: