





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
L3 managed rackmount switch: 24 x Gigabit RJ45, 24 x Gigabit SFP, 6 x 10G SFP+
Non-PoE, for fibre and copper networks
The Hikvision DS-3E3730 is a Layer 3 fully managed switch for businesses, campuses and system integrators who need routing, segmentation and high-speed uplinks in a rackmount network switch. With 24 Gigabit RJ45 ports, 24 Gigabit SFP fibre ports and 6 10G SFP+ fibre ports, it covers a wide range of connection types from one device.
Layer 3 switching means the DS-3E3730 can route traffic between networks, not only switch frames within one network. This is useful when you need separate subnets, routed links between buildings or sites, or a core switch that sits between access switches and the wider network.
Routing support is the main reason to choose a layer 3 switch over a basic managed switch. Static routes suit small, fixed networks where paths rarely change. Policy routing lets you direct specific traffic along chosen paths, which can help when different applications need different routes. The dynamic protocols listed for the DS-3E3730, including RIP, OSPF and BGP, allow the switch to learn and share routes with other routers and layer 3 switches. MPLS support is also listed for networks that use label-based forwarding.
Port-based VLANs and IEEE 802.1Q tagged VLANs let you divide one physical switch into several logical networks. This keeps staff, cameras, point-of-sale systems and guest traffic apart without needing separate hardware. GVRP can help propagate VLAN information across trunk links. IGMP snooping and multicast filtering reduce unnecessary multicast flooding, which helps when video streams or other multicast services share the network.
QoS features based on IEEE 802.1p, 802.1Q and TOS/DiffServ allow traffic to be classified and prioritised. This helps time-sensitive services, such as voice or video, keep working when the network is busy.
IEEE 802.1X port-based authentication can require users or devices to prove their identity before they gain network access. RADIUS and TACACS+ support allows the switch to work with central authentication servers. DHCP snooping helps protect the network from rogue address assignments, while DHCP server and relay functions provide address management across VLANs.
EAPS and ERPS are ring network protection protocols. In a ring topology, they can help restore connectivity if one link fails, which is useful for backbone links or industrial and campus networks where downtime is costly.
The DS-3E3730 can be configured through a web browser, a console port, Telnet or SSH. Telnet is an older, unencrypted method, so SSH is generally preferred for remote administration. SNMPv1, v2c and v3 support lets network management software monitor the switch and receive status information. SNMPv3 offers stronger security than the earlier versions.
The DS-3E3730 is suited to server rooms and network cabinets where a rackmount core or distribution switch is needed. Typical uses include connecting access switches in a building, linking several floors or sites over fibre, segmenting a network into VLANs, and providing routed connectivity between subnets. It can also support surveillance and access-control networks that need VLANs, multicast control and dependable uplinks.
Because the DS-3E3730 is a non-PoE switch, it is intended for devices with their own power supply. Where cameras or access points need power over Ethernet, a PoE switch from the same range should be considered instead.
Choose the DS-3E3730 when you need layer 3 routing, a high number of gigabit and fibre ports, and 10G uplinks in one rackmount unit. For simpler networks that only need switching, a layer 2 managed switch may be enough. Check the supplier’s specifications and your network plan before purchase to confirm that the switch meets your requirements.
Hikvision
L3 managed rackmount switch: 24 x Gigabit RJ45, 24 x Gigabit SFP, 6 x 10G SFP+
Non-PoE, for fibre and copper networks
Share this on your favourite channel:



